Slimserver version used : 6.5.1 SlimServer_6.5_v2006-10-28.dmg
Transporter firmware updated with firmware included with slimserver. 

Initial setup
- connected Transporter word clock input to a 44.1 kHz word clock
- connected Transporter AES output to Tact RCS 2.2X AES input
- powered up Transporter
- selected word clock as reference

Works OK. 

Steps to reproduce the problem :
- disconnect word clock input
- reconnect word clock input
There is no usable signal on the AES output

If clock reference is set to internal clock, it works. 
If clock reference is set to external word clock (with clock on and cable connected), no AES output. 

The transporter has to be hard reset (unplug power cord) to get a signal on the AES output. 
Not very important but can cause a big loss of time. 

I think that problem is hardware or firmware related ant that SlimServer OS is not important. 


Frederic