Bugzilla – Bug 14127
Factory Fresh duet prompts with PIN when connecting to test.sn
Last modified: 2011-05-30 07:18:44 UTC
Simulating the 'out of box' experience with a duet that has <7.4 firmware will result in PIN being displayed on the Controller Steps to reproduce Load 7.3.3 or MP firmware onto Jive/Ray Factory Reset Jive/Ray Power down both devices Shut down any active SC/SBS local hosts Log onto test.sn with admin account Remove the MAC address of Jive/Ray Power up jive/ray walk through the setup procedure (when prompted for network, log onto network with access to test.sn) Ray will update Jive will prompt with Player PIN
Created attachment 5887 [details] serial capture Here is the serial capture from a Jive doing the above steps.
== Auto-comment from SVN commit #7409 to the network repo by andy == == https://svn.slimdevices.com/network?view=revision&revision=7409 == Fixed bug 14127, workaround issue with older Jive firmware not updating when setting up a Ray. The PIN screen will still be shown but only for several seconds
This unfortunately needs a lot of testing, all possible combinations of Jive setup with/without a Ray, etc. :(
I see the pin screen for about 4 seconds, is there anyway we can shorten that time? or replace the message with 'please wait' instead? or is the PIN hard coded in the firmware.
Nope, just have to live with it.
Reopening and targeting to 7.4.1. This needs more review. Can we alter the PIN displayed? Display a blank PIN? Something besides showing a PIN.