more /var/log/messages Jan 1 00:00:11 syslogd started: BusyBox v1.13.4 Jan 1 00:00:11 kernel: klogd started: BusyBox v1.13.4 (2009-09-02 14:43:49 PDT) Jan 1 00:00:11 kernel: [ 0.000000] Linux version 2.6.26.8-rt16 (parabuild@compute-0-4.local) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT RT Mon Sep 7 07:12:09 PDT 2009 Jan 1 00:00:12 kernel: [ 0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 Jan 1 00:00:12 kernel: [ 0.000000] Machine: Logitech MX25 Baby Board Jan 1 00:00:12 kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback Jan 1 00:00:12 root: udev/mount.sh [/dev/mtdblock:cramfs] is blacklisted, ignoring Jan 1 00:00:12 kernel: [ 0.000000] On node 0 totalpages: 16384 Jan 1 00:00:12 kernel: [ 0.000000] DMA zone: 48 pages used for memmap Jan 1 00:00:12 kernel: [ 0.000000] DMA zone: 0 pages reserved Jan 1 00:00:12 root: udev/mount.sh [/dev/mtdblock:kernel] is blacklisted, ignoring Jan 1 00:00:12 kernel: [ 0.000000] DMA zone: 6096 pages, LIFO batch:0 Jan 1 00:00:12 kernel: [ 0.000000] Normal zone: 80 pages used for memmap Jan 1 00:00:12 kernel: [ 0.000000] Normal zone: 10160 pages, LIFO batch:1 Jan 1 00:00:12 kernel: [ 0.000000] Movable zone: 0 pages used for memmap Jan 1 00:00:12 kernel: [ 0.000000] CPU0: D VIVT write-back cache Jan 1 00:00:12 root: udev/mount.sh [/dev/mtdblock:cramfs_bak] is blacklisted, ignoring Jan 1 00:00:12 kernel: [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Jan 1 00:00:12 kernel: [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Jan 1 00:00:12 kernel: [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Jan 1 00:00:12 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Jan 1 00:00:12 kernel: [ 0.000000] Kernel command line: console=ttymxc1,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs Jan 1 00:00:12 kernel: [ 0.000000] Preemptible RCU implementation. Jan 1 00:00:12 kernel: [ 0.000000] MXC IRQ initialized Jan 1 00:00:12 kernel: [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) Jan 1 00:00:12 kernel: [ 0.000000] MXC GPT timer initialized, rate = 12000000 Jan 1 00:00:12 kernel: [ 0.000000] WARNING: Clock divider has been truncated, clock error 333 [ps] per 83 [ns] Jan 1 00:00:12 kernel: [ 0.000000] Console: colour dummy device 80x30 Jan 1 00:00:12 kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Jan 1 00:00:12 root: udev/mount.sh [/dev/mtdblock:kernel_bak] is blacklisted, ignoring Jan 1 00:00:13 kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Jan 1 00:00:13 kernel: [ 0.000000] Memory: 64MB = 64MB total Jan 1 00:00:13 kernel: [ 0.000000] Memory: 61968KB available (2588K code, 248K data, 120K init) Jan 1 00:00:13 root: udev/mount.sh [/dev/mtdblock:ubi] is blacklisted, ignoring Jan 1 00:00:13 kernel: [ 0.000000] Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144) Jan 1 00:00:13 kernel: [ 0.000000] Mount-cache hash table entries: 512 Jan 1 00:00:13 kernel: [ 0.000000] CPU: Testing write buffer coherency: ok Jan 1 00:00:13 kernel: [ 0.000000] net_namespace: 276 bytes Jan 1 00:00:13 kernel: [ 0.000000] NET: Registered protocol family 16 Jan 1 00:00:13 kernel: [ 0.000000] AIPS1 VA base: 0xfc000000 Jan 1 00:00:13 watchdog[543]: starting daemon (5.6): Jan 1 00:00:13 kernel: [ 0.000000] CPU is i.MX0 Revision 0.2 Jan 1 00:00:13 watchdog[543]: int=5s realtime=yes sync=no soft=no mla=0 mem=0 semkey=1234 Jan 1 00:00:13 root: udev/mount.sh [/dev/mtdblock:redboot] is blacklisted, ignoring Jan 1 00:00:13 watchdog[543]: ping: no machine to check Jan 1 00:00:13 kernel: [ 0.000000] Clock input source is 24000000 Jan 1 00:00:13 kernel: [ 0.000000] MXC GPIO hardware Jan 1 00:00:13 kernel: [ 0.000000] Using SDMA I.API Jan 1 00:00:13 kernel: [ 0.000000] MXC DMA API initialized Jan 1 00:00:13 kernel: [ 0.000000] epit_clk: 66500000 Jan 1 00:00:13 kernel: [ 0.000000] per_epit_clk: 66500000 Jan 1 00:00:13 watchdog[543]: file: no file to check Jan 1 00:00:13 watchdog[543]: pidfile: /var/run/squeezeplay.pid Jan 1 00:00:13 watchdog[543]: interface: no interface to check Jan 1 00:00:13 watchdog[543]: test=none(0) repair=/usr/sbin/repair.sh alive=/dev/watchdog heartbeat=none temp=none to=noone no_act=no Jan 1 00:00:13 kernel: [ 0.000000] ahb_clk: 133000000 Jan 1 00:00:13 kernel: [ 0.000000] cpu_clk: 399000000 Jan 1 00:00:13 kernel: [ 0.000000] mpll: 532000000 Jan 1 00:00:13 kernel: [ 0.000000] osc24m: 24000000 Jan 1 00:00:13 kernel: [ 0.000138] MXC EPIT timer initialized, rate = 16625000 4 Jan 1 00:00:13 kernel: [ 0.029981] MXC I2C driver Jan 1 00:00:13 kernel: [ 0.032573] MXC I2C driver Jan 1 00:00:13 kernel: [ 0.036943] ASoC version 0.20 Jan 1 00:00:13 kernel: [ 0.131319] NET: Registered protocol family 1 Jan 1 00:00:13 root: udev/mount.sh [/dev/ram10] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.134123] Bus freq driver module loaded Jan 1 00:00:14 kernel: [ 0.138422] krcupreemptd setsched 0 Jan 1 00:00:14 kernel: [ 0.138465] prio = 98 Jan 1 00:00:14 kernel: [ 0.141183] Registering unionfs 2.5.1 (for 2.6.26.8) Jan 1 00:00:14 kernel: [ 0.142061] msgmni has been set to 121 Jan 1 00:00:14 kernel: [ 0.142410] io scheduler noop registered Jan 1 00:00:14 kernel: [ 0.142450] io scheduler anticipatory registered Jan 1 00:00:14 root: udev/mount.sh [/dev/mtdblock:ubifs] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.142479] io scheduler deadline registered Jan 1 00:00:14 kernel: [ 0.142688] io scheduler cfq registered (default) Jan 1 00:00:14 kernel: [ 0.147291] **** baby_lcd_spi_init Jan 1 00:00:14 kernel: [ 0.379257] Console: switching to colour frame buffer device 30x40 Jan 1 00:00:14 kernel: [ 0.385440] mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully. Jan 1 00:00:14 kernel: [ 0.390332] mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully. Jan 1 00:00:14 kernel: [ 0.393559] MXC Backlight Device mxc_lcdc_bl.0 Initialized. Jan 1 00:00:14 kernel: [ 0.469576] Serial: MXC Internal UART driver Jan 1 00:00:14 kernel: [ 0.469983] mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC Jan 1 00:00:14 root: udev/mount.sh [/dev/ram11] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.470098] console [ttymxc1] enabled Jan 1 00:00:14 kernel: [ 0.800931] brd: module loaded Jan 1 00:00:14 kernel: [ 0.824658] loop: module loaded Jan 1 00:00:14 root: udev/mount.sh [/dev/ram12] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.827896] FEC ENET Version 0.2 Jan 1 00:00:14 root: udev/mount.sh [/dev/ram1] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.833050] fec: PHY @ 0x1, ID 0x001cc815 -- RTL8201E Jan 1 00:00:14 root: udev/mount.sh [/dev/ram14] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.840099] eth0: ethernet 00:04:20:26:01:80 Jan 1 00:00:14 root: udev/mount.sh [/dev/ram0] is blacklisted, ignoring Jan 1 00:00:14 root: udev/mount.sh [/dev/ram13] is blacklisted, ignoring Jan 1 00:00:14 kernel: [ 0.846142] MXC MTD nand Driver 2.5 Jan 1 00:00:15 kernel: [ 0.851213] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Jan 1 00:00:15 kernel: [ 0.860483] Bad block table found at page 65472, version 0x01 Jan 1 00:00:15 kernel: [ 0.861182] Bad block table found at page 65408, version 0x01 Jan 1 00:00:15 kernel: [ 0.861461] nand_read_bbt: Bad block at 0x04fe0000 Jan 1 00:00:15 kernel: [ 0.861500] nand_read_bbt: Bad block at 0x058a0000 Jan 1 00:00:15 root: udev/mount.sh [/dev/ram15] is blacklisted, ignoring Jan 1 00:00:15 kernel: [ 0.862035] Searching for RedBoot partition table in NAND 128MiB 3,3V 8-bit at offset 0x7f60000 Jan 1 00:00:15 kernel: [ 0.882051] No RedBoot partition table detected in NAND 128MiB 3,3V 8-bit Jan 1 00:00:15 kernel: [ 0.889152] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": Jan 1 00:00:15 kernel: [ 0.895420] 0x00000000-0x00080000 : "redboot" Jan 1 00:00:15 kernel: [ 0.904974] 0x00080000-0x07f40000 : "ubi" Jan 1 00:00:15 root: udev/mount.sh [/dev/ram2] is blacklisted, ignoring Jan 1 00:00:15 kernel: [ 0.916763] UBI: attaching mtd1 to ubi0 Jan 1 00:00:15 kernel: [ 0.920655] UBI: physical eraseblock size: 131072 bytes (128 KiB) Jan 1 00:00:15 kernel: [ 0.926974] UBI: logical eraseblock size: 129024 bytes Jan 1 00:00:15 kernel: [ 0.932420] UBI: smallest flash I/O unit: 2048 Jan 1 00:00:15 kernel: [ 0.937157] UBI: sub-page size: 512 Jan 1 00:00:15 kernel: [ 0.941811] UBI: VID header offset: 512 (aligned 512) Jan 1 00:00:15 kernel: [ 0.947683] UBI: data offset: 2048 Jan 1 00:00:15 kernel: [ 1.191902] UBI: attached mtd1 to ubi0 Jan 1 00:00:15 kernel: [ 1.195697] UBI: MTD device name: "ubi" Jan 1 00:00:15 kernel: [ 1.200514] UBI: MTD device size: 126 MiB Jan 1 00:00:15 root: udev/mount.sh [/dev/ram4] is blacklisted, ignoring Jan 1 00:00:15 kernel: [ 1.205519] UBI: number of good PEBs: 1012 Jan 1 00:00:15 kernel: [ 1.210259] UBI: number of bad PEBs: 2 Jan 1 00:00:15 kernel: [ 1.214739] UBI: max. allowed volumes: 128 Jan 1 00:00:15 kernel: [ 1.219389] UBI: wear-leveling threshold: 4096 Jan 1 00:00:15 kernel: [ 1.224130] UBI: number of internal volumes: 1 Jan 1 00:00:15 kernel: [ 1.228604] UBI: number of user volumes: 5 Jan 1 00:00:15 root: udev/mount.sh [/dev/ram3] is blacklisted, ignoring Jan 1 00:00:15 kernel: [ 1.233083] UBI: available PEBs: 688 Jan 1 00:00:15 kernel: [ 1.237731] UBI: total number of reserved PEBs: 324 Jan 1 00:00:15 kernel: [ 1.242646] UBI: number of PEBs reserved for bad PEB handling: 10 Jan 1 00:00:15 kernel: [ 1.248777] UBI: max/mean erase counter: 245/11 Jan 1 00:00:15 kernel: [ 1.253377] UBI: background thread "ubi_bgt0d" started, PID 280 Jan 1 00:00:15 kernel: [ 1.261866] mice: PS/2 mouse device common for all mice Jan 1 00:00:15 kernel: [ 1.267153] MXC keypad loaded Jan 1 00:00:15 kernel: [ 1.272092] input: mxckpd as /class/input/input0 Jan 1 00:00:15 kernel: [ 1.483649] MXC WatchDog Driver 2.0 Jan 1 00:00:15 kernel: [ 1.488609] MXC Watchdog # 0 Timer: initial timeout 60 sec Jan 1 00:00:15 kernel: [ 1.501470] input: front panel as /class/input/input1 Jan 1 00:00:16 kernel: [ 1.724886] input: msp430 as /class/input/input2 Jan 1 00:00:16 kernel: [ 1.843471] msp430 1-0010: rtc core: registered msp430 as rtc0 Jan 1 00:00:16 kernel: [ 1.851169] Requesting msp430 firmware msp430-0002.txt Jan 1 00:00:16 kernel: [ 1.857711] firmware: requesting msp430-0002.txt Jan 1 00:00:16 kernel: [ 1.866688] i.MX ADC at 0x50030000 irq 46 Jan 1 00:00:16 root: udev/mount.sh [/dev/ram5] is blacklisted, ignoring Jan 1 00:00:16 kernel: [ 1.872045] mxsdhci: MXC Secure Digital Host Controller Interface driver Jan 1 00:00:16 kernel: [ 1.878995] mxsdhci: MXC SDHCI Controller Driver. Jan 1 00:00:16 kernel: [ 1.920838] mmc0: SDHCI detect irq 0 irq 9 PIO Jan 1 00:00:16 kernel: [ 1.981336] Advanced Linux Sound Architecture Driver Version 1.0.16. Jan 1 00:00:16 kernel: [ 2.092413] AIC3104 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=1 buf->addr=78001000 buf->area=c4860000 size=65536 Jan 1 00:00:16 kernel: [ 2.105157] DMA Sound Buffers Allocated:UseIram=1 buf->addr=83e20000 buf->area=fde97000 size=65536 Jan 1 00:00:16 kernel: [ 2.114183] asoc: aic3104-dai <-> imx-ssi-1 mapping ok Jan 1 00:00:16 kernel: [ 2.157281] mmc0: queuing CIS tuple 0x01 length 3 Jan 1 00:00:16 kernel: [ 2.168942] mmc0: queuing CIS tuple 0x1a length 5 Jan 1 00:00:16 kernel: [ 2.173900] mmc0: queuing CIS tuple 0x1b length 8 Jan 1 00:00:16 root: udev/mount.sh [/dev/ram8] is blacklisted, ignoring Jan 1 00:00:16 kernel: [ 2.174839] mmc0: queuing CIS tuple 0x14 length 0 Jan 1 00:00:16 kernel: [ 2.270981] ALSA device list: Jan 1 00:00:16 kernel: [ 2.273997] #0: baby (aic3104) Jan 1 00:00:16 kernel: [ 2.277249] oprofile: using timer interrupt. Jan 1 00:00:16 kernel: [ 2.292323] NET: Registered protocol family 2 Jan 1 00:00:16 kernel: [ 2.391076] mmc0: queuing CIS tuple 0x80 length 1 Jan 1 00:00:16 kernel: [ 2.391562] mmc0: queuing CIS tuple 0x81 length 1 Jan 1 00:00:16 root: udev/mount.sh [/dev/ram7] is blacklisted, ignoring Jan 1 00:00:16 kernel: [ 2.392040] mmc0: queuing CIS tuple 0x82 length 1 Jan 1 00:00:16 kernel: [ 2.392254] mmc0: new SDIO card at address 0001 Jan 1 00:00:16 root: udev/mount.sh [/dev/ram6] is blacklisted, ignoring Jan 1 00:00:16 kernel: [ 2.641855] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 00:00:16 kernel: [ 2.655212] TCP established hash table entries: 2048 (order: 2, 16384 bytes) Jan 1 00:00:16 kernel: [ 2.663272] TCP bind hash table entries: 2048 (order: 3, 57344 bytes) Jan 1 00:00:16 kernel: [ 2.671421] TCP: Hash tables configured (established 2048 bind 2048) Jan 1 00:00:16 kernel: [ 2.677822] TCP reno registered Jan 1 00:00:16 kernel: [ 2.805982] TCP cubic registered Jan 1 00:00:16 kernel: [ 2.809278] NET: Registered protocol family 17 Jan 1 00:00:16 kernel: [ 2.825432] msp430 1-0010: setting system clock to 1970-01-01 00:00:05 UTC (5) Jan 1 00:00:16 kernel: [ 2.840488] VFS: Mounted root (cramfs filesystem) readonly. Jan 1 00:00:16 kernel: [ 2.846967] Freeing init memory: 120K Jan 1 00:00:16 kernel: [ 4.024410] UBIFS: recovery needed Jan 1 00:00:16 kernel: [ 4.068016] UBIFS: recovery completed Jan 1 00:00:16 kernel: [ 4.071758] UBIFS: mounted UBI device 0, volume 2, name "ubifs" Jan 1 00:00:16 kernel: [ 4.077728] UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) Jan 1 00:00:16 kernel: [ 4.085086] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) Jan 1 00:00:16 kernel: [ 4.092370] UBIFS: media format: w4/r0 (latest is w4/r0) Jan 1 00:00:16 kernel: [ 4.098243] UBIFS: default compressor: lzo Jan 1 00:00:16 kernel: [ 4.102376] UBIFS: reserved for root: 444870 bytes (434 KiB) Jan 1 00:00:16 root: udev/mount.sh [/dev/ram9] is blacklisted, ignoring Jan 1 00:00:17 kernel: [ 14.458182] msp430: firmware ok (773) Jan 1 00:00:17 root: wlan: starting Jan 1 00:00:19 kernel: [ 16.866081] AR6000 Reg Code = 0x40000060 Jan 1 00:00:19 root: Starting wpa_supplicant Jan 1 00:00:21 root: Started wpa_supplicant Jan 1 00:00:21 root: wlan started Jan 1 00:00:22 udhcpc[765]: udhcpc (v1.13.4) started Jan 1 00:00:22 root: udhcpc_action eth1 deconfig ip= Jan 1 00:00:22 udhcpc[765]: Sending discover... Jan 1 00:00:24 squeezeplay: INFO squeezeplay - JiveMain.lua:275 SqueezePlay version 7.4.0 r7453 Jan 1 00:00:25 squeezeplay: INFO squeezeplay.ui.draw - jiveL_initSDL:174 240,320 16 bits/pixel 2 bytes/pixel [R<<11 G<<5 B<<0] Jan 1 00:00:25 squeezeplay: INFO squeezeplay.ui.draw - jiveL_initSDL:175 Hardware acceleration is available Jan 1 00:00:25 squeezeplay: INFO squeezeplay.ui.draw - jive_surface_set_video_mode:70 Using a hardware double buffer Jan 1 00:00:25 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:91 User Path: /etc/squeezeplay/userpath Jan 1 00:00:26 udhcpc[765]: Sending discover... Jan 1 00:00:26 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupSoundEffects Jan 1 00:00:26 kernel: [ 23.898863] channel hint set to 2437 Jan 1 00:00:26 kernel: [ 23.945022] AR6000 connected event on freq 2437 with bssid 00:22:3f:95:d3:ef listenInterval=100, beaconInterval = 100, beaconIeLen = 24 assocReqLen=63 assocRespLen =59 Jan 1 00:00:26 kernel: [ 23.960217] Network: Infrastructure Jan 1 00:00:26 root: wpa_action eth1 CONNECTED Jan 1 00:00:26 udhcpc[765]: Performing a DHCP renew Jan 1 00:00:26 udhcpc[765]: Sending discover... Jan 1 00:00:27 udhcpc[765]: Sending select for 192.168.1.20... Jan 1 00:00:27 udhcpc[765]: Lease of 192.168.1.20 obtained, lease time 86400 Jan 1 00:00:27 root: udhcpc_action eth1 bound ip=192.168.1.20 Jan 1 00:00:27 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SqueezeboxBaby Jan 1 00:00:28 squeezeplay: INFO applet.Squeezebox - SqueezeboxApplet.lua:159 beta hardware Jan 1 00:00:29 squeezeplay: debug_pagefaults:192 Pagefaults, Major:11 Minor:1648 Jan 1 00:00:29 squeezeplay: INFO applet.Squeezebox - SqueezeboxApplet.lua:187 unclean reboot Jan 1 00:00:29 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: AboutJive Jan 1 00:00:29 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: AlarmSnooze Jan 1 00:00:29 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: BlankScreen Jan 1 00:00:29 squeezeplay: debug_pagefaults:192 Pagefaults, Major:1 Minor:47 Jan 1 00:00:29 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: ChooseMusicSource Jan 1 00:00:29 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Clock Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: CrashLog Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: CustomizeHomeMenu Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: DebugSkin Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: DebugTouch Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Demo Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Diagnostics Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Experiments Jan 1 00:00:30 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: HttpAuth Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: ImageViewer Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: InfoBrowser Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: LogSettings Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: MacroPlay Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: NowPlaying Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Playback Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: QVGAbaseSkin Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: QVGAlandscapeSkin Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: ScreenSavers Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: Screenshot Jan 1 00:00:31 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SelectPlayer Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SelectSkin Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupAppletInstaller Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupDateTime Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupFactoryReset Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupFirmwareUpgrade Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupLanguage Jan 1 00:00:32 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupNetTest Jan 1 00:00:33 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupNetworking Jan 1 00:00:33 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupSSH Jan 1 00:00:33 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupSqueezebox Jan 1 00:00:33 squeezeplay: WARN applet.SqueezeboxBaby - SqueezeboxBabyApplet.lua:353 No case color found (assuming black) examining serial: 1106090006260180 Jan 1 00:00:33 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupWallpaper Jan 1 00:00:33 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SetupWelcome Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SlimBrowser Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SlimDiscovery Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SlimMenus Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: SqueezeNetworkPIN Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: TestAmbient Jan 1 00:00:34 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: TestAudioRouting Jan 1 00:00:35 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: TestDisplay Jan 1 00:00:35 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: TestKeypad Jan 1 00:00:35 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:314 Registering: TestTones Jan 1 00:00:36 squeezeplay: INFO squeezeplay - JiveMain.lua:594 select skin: QVGAlandscapeSkin Jan 1 00:00:42 squeezeplay: ERROR squeezeplay.ui.draw - jive_surface_load_image:195 Can't find image applets/QVGAbaseSkin/images/IconsResized/icon_power_off2.png Jan 1 00:00:42 squeezeplay: ERROR squeezeplay.ui.draw - jive_surface_load_image:195 Can't find image applets/QVGAbaseSkin/images/MISSING_PLAYMODE_STOP_ICON Jan 1 00:00:42 squeezeplay: ERROR squeezeplay.ui.draw - jive_surface_load_image:195 Can't find image applets/QVGAbaseSkin/images/MISSING_PLAYLIST_MODE_ICON Jan 1 00:00:42 squeezeplay: ERROR squeezeplay.ui.draw - jive_surface_load_image:195 Can't find image applets/QVGAbaseSkin/images/MISSING_PARTY_MODE_ICON Jan 1 00:00:42 squeezeplay: WARN lua.hooks - perf_hook:69 Func took 5230ms Jan 1 00:00:42 squeezeplay: stack traceback: Jan 1 00:00:42 squeezeplay: ...are/jive/applets/QVGAbaseSkin/QVGAbaseSkinApplet.lua:2311: in function 'skin' Jan 1 00:00:42 squeezeplay: ...pplets/QVGAlandscapeSkin/QVGAlandscapeSkinApplet.lua:104: in function '?' Jan 1 00:00:42 squeezeplay: /usr/share/jive/jive/JiveMain.lua:574: in function '_loadSkin' Jan 1 00:00:42 squeezeplay: /usr/share/jive/jive/JiveMain.lua:595: in function 'setSelectedSkin' Jan 1 00:00:42 squeezeplay: ...usr/share/jive/applets/SelectSkin/SelectSkinMeta.lua:52: in function 'configureApplet' Jan 1 00:00:42 squeezeplay: /usr/share/jive/jive/AppletManager.lua:322: in function Jan 1 00:00:43 squeezeplay: [C 0x4dcc1]: in function 'pcall' Jan 1 00:00:43 squeezeplay: /usr/share/jive/jive/App Jan 1 00:00:43 squeezeplay: INFO applet.SlimDiscovery - SlimDiscoveryApplet.lua:583 selected Squeezebox Radio Jan 1 00:00:43 squeezeplay: INFO applet.SlimMenus - SlimMenusApplet.lua:974 SlimMenusApplet:notify_playerCurrent(LocalPlayer {Squeezebox Radio}) Jan 1 00:00:43 squeezeplay: INFO applet.SlimMenus - SlimMenusApplet.lua:1036 No server, Fetching initial server, SlimServer {mysqueezebox.com} Jan 1 00:00:43 squeezeplay: INFO applet.SlimMenus - SlimMenusApplet.lua:1045 player changed from:false to LocalPlayer {Squeezebox Radio} but server not yet connected Jan 1 00:00:43 squeezeplay: INFO squeezeplay.applets - AppletManager.lua:704 store settings: SlimDiscovery Jan 1 00:00:45 squeezeplay: INFO squeezeplay - JiveMain.lua:455 Calling postOnScreenInits callback Jan 1 00:00:45 squeezeplay: INFO squeezeplay - JiveMain.lua:455 Calling postOnScreenInits callback Jan 1 00:00:48 squeezeplay: INFO net.slimproto - SlimProto.lua:549 connect to baby.squeezenetwork.com (67.155.107.15) Jan 1 00:00:54 squeezeplay: INFO squeezebox.server - SlimServer.lua:685 connected mysqueezebox.com Jan 1 00:00:59 squeezeplay: INFO squeezebox.server - SlimServer.lua:313 mysqueezebox.com firmware=http://update.squeezenetwork.com/update/firmware/.7.4/baby_7.4.0_r7453.bin force=false Jan 1 00:01:53 squeezeplay: WARN applet.Clock - ClockApplet.lua:809 This device does not seem to have the right time: Thu Jan 1 00:01:53 1970 Jan 1 00:01:53 squeezeplay: INFO applet.ScreenSavers - ScreenSaversApplet.lua:239 activating Clock screensaver Jan 1 00:01:59 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {mysqueezebox.com_Request}(R)) Jan 1 00:07:45 squeezeplay: INFO net.slimproto - SlimProto.lua:691 connection error: closed, reconnecting in 1.35 seconds Jan 1 00:07:51 squeezeplay: INFO net.slimproto - SlimProto.lua:549 connect to baby.squeezenetwork.com (67.155.107.15) Jan 1 00:46:52 squeezeplay: INFO squeezeplay.applets - AppletMeta.lua:145 entering AboutJive Jan 1 00:47:04 squeezeplay: INFO squeezeplay.applets - AppletMeta.lua:145 entering Diagnostics Jan 1 00:53:55 squeezeplay: WARN applet.Clock - ClockApplet.lua:809 This device does not seem to have the right time: Thu Jan 1 00:53:55 1970 Jan 1 00:53:55 squeezeplay: INFO applet.ScreenSavers - ScreenSaversApplet.lua:239 activating Clock screensaver # # # # # cat /etc/squeezeos.version 7.4.0 r7453 root@compute-0-4.local Tue Sep 8 11:08:50 PDT 2009 # # # upbinfo -a /bin/sh: upbinfo: not found # ubinfo -a UBI version: 1 Count of UBI devices: 1 UBI control device major/minor: 10:63 Present UBI devices: ubi0 ubi0: Volumes count: 5 Logical eraseblock size: 129024 Total amount of logical eraseblocks: 1012 (130572288 bytes, 124.5 MiB) Amount of available logical eraseblocks: 688 (88768512 bytes, 84.7 MiB) Maximum count of volumes 128 Count of bad physical eraseblocks: 2 Count of reserved physical eraseblocks: 10 Current maximum erase counter value: 245 Minimum input/output unit size: 2048 bytes Character device major/minor: 253:0 Present volumes: 0, 1, 2, 3, 4 Volume ID: 0 (on ubi0) Type: dynamic Alignment: 1 Size: 23 LEBs (2967552 bytes, 2.8 MiB) State: OK Name: kernel_bak Character device major/minor: 253:1 ----------------------------------- Volume ID: 1 (on ubi0) Type: dynamic Alignment: 1 Size: 91 LEBs (11741184 bytes, 11.2 MiB) State: OK Name: cramfs_bak Character device major/minor: 253:2 ----------------------------------- Volume ID: 2 (on ubi0) Type: dynamic Alignment: 1 Size: 82 LEBs (10579968 bytes, 10.1 MiB) State: OK Name: ubifs Character device major/minor: 253:3 ----------------------------------- Volume ID: 3 (on ubi0) Type: dynamic Alignment: 1 Size: 23 LEBs (2967552 bytes, 2.8 MiB) State: OK Name: kernel Character device major/minor: 253:4 ----------------------------------- Volume ID: 4 (on ubi0) Type: dynamic Alignment: 1 Size: 91 LEBs (11741184 bytes, 11.2 MiB) State: OK Name: cramfs Character device major/minor: 253:5 # reboot The system is going down NOW! # Sending SIGTERM to all processes [ 4526.680066] i2c-adapter i2c-0: Data not transmitted [ 4526.685131] i2c-adapter i2c-0: Data not transmitted [ 4526.690264] i2c-adapter i2c-0: Data not transmitted [ 4526.695270] i2c-adapter i2c-0: Data not transmitted [ 4526.795102] eth1 (WE) : Wireless Event too big (33) [ 4526.820491] AR6000 disconnected from 00:22:3f:95:d3:ef Sending SIGKILL to all processes <2>mxc_wdt: Unexpected close, not stopping! Requesting system reboot [ 4530.897320] MXC Watchdog # 0 shutdown [ 4530.901193] Restarting system. ++NAND: RCSR=54200902 Searching for BBT table in the flash ... . Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 639 is bad Block 709 is bad Total bad blocks: 2 .FEC PHY: RTL8201EL FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:26:01:80 No IP info for device! Unrecognized chip: 0xf8!!! hardware reset by WDOG Clock input is 24 MHz RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 13:29:54, Jun 30 2009 Platform: Logitech Baby (i.MX25 ) PASS 1.0 [x32 DDR] System type 2070 revision 2 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x03f00000, [0x00095250-0x03ef1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 635 ..........................................................................................................................................skipping bad block 705 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x002d4800 [ 0.000000] Linux version 2.6.26.8-rt16 (parabuild@compute-0-4.local) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT RT Mon Sep 7 07:12:09 PDT 2009 [ 0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 [ 0.000000] Machine: Logitech MX25 Baby Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttymxc1,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs [ 0.000000] Preemptible RCU implementation. [ 0.000000] MXC IRQ initialized [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] MXC GPT timer initialized, rate = 12000000 [ 0.000000] WARNING: Clock divider has been truncated, clock error 333 [ps] per 83 [ns] [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 64MB = 64MB total [ 0.000000] Memory: 61968KB available (2588K code, 248K data, 120K init) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] net_namespace: 276 bytes [ 0.000000] NET: Registered protocol family 16 [ 0.000000] AIPS1 VA base: 0xfc000000 [ 0.000000] CPU is i.MX0 Revision 0.2 [ 0.000000] Clock input source is 24000000 [ 0.000000] MXC GPIO hardware [ 0.000000] Using SDMA I.API [ 0.000000] MXC DMA API initialized [ 0.000000] epit_clk: 66500000 [ 0.000000] per_epit_clk: 66500000 [ 0.000000] ahb_clk: 133000000 [ 0.000000] cpu_clk: 399000000 [ 0.000000] mpll: 532000000 [ 0.000000] osc24m: 24000000 [ 0.000138] MXC EPIT timer initialized, rate = 16625000 4 [ 0.030040] MXC I2C driver [ 0.032654] MXC I2C driver [ 0.037068] ASoC version 0.20 [ 0.131312] NET: Registered protocol family 1 [ 0.134126] Bus freq driver module loaded [ 0.138424] krcupreemptd setsched 0 [ 0.138463] prio = 98 [ 0.141175] Registering unionfs 2.5.1 (for 2.6.26.8) [ 0.142046] msgmni has been set to 121 [ 0.142394] io scheduler noop registered [ 0.142436] io scheduler anticipatory registered [ 0.142467] io scheduler deadline registered [ 0.142676] io scheduler cfq registered (default) [ 0.147288] **** baby_lcd_spi_init [ 0.379260] Console: switching to colour frame buffer device 30x40 [ 0.385438] mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully. [ 0.390329] mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully. [ 0.393583] MXC Backlight Device mxc_lcdc_bl.0 Initialized. [ 0.469684] Serial: MXC Internal UART driver [ 0.470096] mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC [ 0.470207] console [ttymxc1] enabled [ 0.800983] brd: module loaded [ 0.824697] loop: module loaded [ 0.827934] FEC ENET Version 0.2 [ 0.833108] fec: PHY @ 0x1, ID 0x001cc815 -- RTL8201E [ 0.840154] eth0: ethernet 00:04:20:26:01:80 [ 0.846219] MXC MTD nand Driver 2.5 [ 0.851256] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 0.862042] Searching for RedBoot partition table in NAND 128MiB 3,3V 8-bit at offset 0x7f60000 [ 0.882041] No RedBoot partition table detected in NAND 128MiB 3,3V 8-bit [ 0.889137] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": [ 0.895407] 0x00000000-0x00080000 : "redboot" [ 0.904975] 0x00080000-0x07f40000 : "ubi" [ 0.916784] UBI: attaching mtd1 to ubi0 [ 0.920675] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.927166] UBI: logical eraseblock size: 129024 bytes [ 0.932612] UBI: smallest flash I/O unit: 2048 [ 0.937350] UBI: sub-page size: 512 [ 0.942009] UBI: VID header offset: 512 (aligned 512) [ 0.947878] UBI: data offset: 2048 [ 1.192041] UBI: attached mtd1 to ubi0 [ 1.195834] UBI: MTD device name: "ubi" [ 1.200651] UBI: MTD device size: 126 MiB [ 1.205655] UBI: number of good PEBs: 1012 [ 1.210392] UBI: number of bad PEBs: 2 [ 1.214871] UBI: max. allowed volumes: 128 [ 1.219523] UBI: wear-leveling threshold: 4096 [ 1.224265] UBI: number of internal volumes: 1 [ 1.228741] UBI: number of user volumes: 5 [ 1.233218] UBI: available PEBs: 688 [ 1.237869] UBI: total number of reserved PEBs: 324 [ 1.242786] UBI: number of PEBs reserved for bad PEB handling: 10 [ 1.248920] UBI: max/mean erase counter: 245/11 [ 1.253525] UBI: background thread "ubi_bgt0d" started, PID 280 [ 1.261994] mice: PS/2 mouse device common for all mice [ 1.267281] MXC keypad loaded [ 1.272228] input: mxckpd as /class/input/input0 [ 1.483648] MXC WatchDog Driver 2.0 [ 1.488593] MXC Watchdog # 0 Timer: initial timeout 60 sec [ 1.501451] input: front panel as /class/input/input1 [ 1.724864] input: msp430 as /class/input/input2 [ 1.843465] msp430 1-0010: rtc core: registered msp430 as rtc0 [ 1.851170] Requesting msp430 firmware msp430-0002.txt [ 1.857715] firmware: requesting msp430-0002.txt [ 1.866685] i.MX ADC at 0x50030000 irq 46 [ 1.872054] mxsdhci: MXC Secure Digital Host Controller Interface driver [ 1.878999] mxsdhci: MXC SDHCI Controller Driver. [ 1.920829] mmc0: SDHCI detect irq 0 irq 9 PIO [ 1.981331] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.092396] AIC3104 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=1 buf->addr=78001000 buf->area=c4860000 size=65536 [ 2.105130] DMA Sound Buffers Allocated:UseIram=1 buf->addr=83e10000 buf->area=fde97000 size=65536 [ 2.114150] asoc: aic3104-dai <-> imx-ssi-1 mapping ok [ 2.260974] ALSA device list: [ 2.263991] #0: baby (aic3104) [ 2.267243] oprofile: using timer interrupt. [ 2.282456] NET: Registered protocol family 2 [ 2.392084] mmc0: new SDIO card at address 0001 [ 2.641857] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 2.655217] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 2.663272] TCP bind hash table entries: 2048 (order: 3, 57344 bytes) [ 2.671424] TCP: Hash tables configured (established 2048 bind 2048) [ 2.677829] TCP reno registered [ 2.805989] TCP cubic registered [ 2.809287] NET: Registered protocol family 17 [ 2.825413] msp430 1-0010: setting system clock to 1970-01-01 00:00:05 UTC (5) [ 2.840436] VFS: Mounted root (cramfs filesystem) readonly. [ 2.846917] Freeing init memory: 120K [ 4.024266] UBIFS: recovery needed [ 4.064950] UBIFS: recovery completed [ 4.068684] UBIFS: mounted UBI device 0, volume 2, name "ubifs" [ 4.074664] UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) [ 4.082034] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) [ 4.089299] UBIFS: media format: w4/r0 (latest is w4/r0) [ 4.095172] UBIFS: default compressor: lzo [ 4.099306] UBIFS: reserved for root: 444870 bytes (434 KiB) Filesystem overlay: unionfs mount: mounting /dev on /mnt/overlay/dev failed: Invalid argument init started: BusyBox v1.13.4 (2009-09-02 14:43:49 PDT) starting pid 363, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd [ 14.107642] msp430: firmware ok (773) Starting lo Starting inetd root: wlan: starting Setting eth1 macaddr: 00:04:20:26:01:80 Load Board Data from /lib/atheros/calData_ar6102_15dBm.bin Updating MAC address BMI Write Memory (address: 0x502400, filename: /lib/atheros/athwlan.bin) BMI Write Memory (address: 0x52d8bc, filename: /lib/atheros/data.patch.hw2_0.bin) BMI Write Memory (address: 0x500418, value: 0x52d8bc) BMI Bit-Wise (OR) modify Register (address: 0x500410, orig:0x0, new: 0x1, mask:0x1) BMI Done [ 16.669527] AR6000 Reg Code = 0x40000060 Selected interface 'eth1' root: wlan started Starting SqueezePlay Please press Enter to activate this console. udhcpc (v1.13.4) started killall: zcip: no process killed Sending discover... Squeezeplay 7.4.0 r7453 Sending discover... Sending discover... killall: zcip: no process killed No lease, forking to background [ 33.728531] channel hint set to 2437 [ 33.799292] AR6000 connected event on freq 2437 with bssid 00:22:3f:95:d3:ef listenInterval=100, beaconInterval = 100, beaconIeLen = 24 assocReqLen=63 assocRespLen =59 [ 33.814501] Network: Infrastructure [ 94.439260] MXC Watchdog # 0 shutdown [ 94.444589] Restarting system. ++NAND: RCSR=54200902 Searching for BBT table in the flash ... . Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 639 is bad Block 709 is bad Total bad blocks: 2 .FEC PHY: RTL8201EL FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:26:01:80 No IP info for device! Unrecognized chip: 0xf8!!! hardware reset by WDOG Clock input is 24 MHz RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 13:29:54, Jun 30 2009 Platform: Logitech Baby (i.MX25 ) PASS 1.0 [x32 DDR] System type 2070 revision 2 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x03f00000, [0x00095250-0x03ef1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 635 ..........................................................................................................................................skipping bad block 705 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x002d4800 [ 0.000000] Linux version 2.6.26.8-rt16 (parabuild@compute-0-4.local) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT RT Mon Sep 7 07:12:09 PDT 2009 [ 0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 [ 0.000000] Machine: Logitech MX25 Baby Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttymxc1,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs [ 0.000000] Preemptible RCU implementation. [ 0.000000] MXC IRQ initialized [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] MXC GPT timer initialized, rate = 12000000 [ 0.000000] WARNING: Clock divider has been truncated, clock error 333 [ps] per 83 [ns] [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 64MB = 64MB total [ 0.000000] Memory: 61968KB available (2588K code, 248K data, 120K init) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] net_namespace: 276 bytes [ 0.000000] NET: Registered protocol family 16 [ 0.000000] AIPS1 VA base: 0xfc000000 [ 0.000000] CPU is i.MX0 Revision 0.2 [ 0.000000] Clock input source is 24000000 [ 0.000000] MXC GPIO hardware [ 0.000000] Using SDMA I.API [ 0.000000] MXC DMA API initialized [ 0.000000] epit_clk: 66500000 [ 0.000000] per_epit_clk: 66500000 [ 0.000000] ahb_clk: 133000000 [ 0.000000] cpu_clk: 399000000 [ 0.000000] mpll: 532000000 [ 0.000000] osc24m: 24000000 [ 0.000139] MXC EPIT timer initialized, rate = 16625000 4 [ 0.029981] MXC I2C driver [ 0.032597] MXC I2C driver [ 0.036987] ASoC version 0.20 [ 0.131326] NET: Registered protocol family 1 [ 0.134111] Bus freq driver module loaded [ 0.138404] krcupreemptd setsched 0 [ 0.138442] prio = 98 [ 0.141166] Registering unionfs 2.5.1 (for 2.6.26.8) [ 0.142042] msgmni has been set to 121 [ 0.142389] io scheduler noop registered [ 0.142432] io scheduler anticipatory registered [ 0.142461] io scheduler deadline registered [ 0.142670] io scheduler cfq registered (default) [ 0.147268] **** baby_lcd_spi_init [ 0.379258] Console: switching to colour frame buffer device 30x40 [ 0.385441] mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully. [ 0.390327] mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully. [ 0.393602] MXC Backlight Device mxc_lcdc_bl.0 Initialized. [ 0.469475] Serial: MXC Internal UART driver [ 0.469880] mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC [ 0.469992] console [ttymxc1] enabled [ 0.800667] brd: module loaded [ 0.824594] loop: module loaded [ 0.827834] FEC ENET Version 0.2 [ 0.833003] fec: PHY @ 0x1, ID 0x001cc815 -- RTL8201E [ 0.840060] eth0: ethernet 00:04:20:26:01:80 [ 0.846118] MXC MTD nand Driver 2.5 [ 0.851187] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 0.862021] Searching for RedBoot partition table in NAND 128MiB 3,3V 8-bit at offset 0x7f60000 [ 0.882035] No RedBoot partition table detected in NAND 128MiB 3,3V 8-bit [ 0.889138] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": [ 0.895407] 0x00000000-0x00080000 : "redboot" [ 0.905001] 0x00080000-0x07f40000 : "ubi" [ 0.916830] UBI: attaching mtd1 to ubi0 [ 0.920912] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.927221] UBI: logical eraseblock size: 129024 bytes [ 0.932657] UBI: smallest flash I/O unit: 2048 [ 0.937396] UBI: sub-page size: 512 [ 0.942053] UBI: VID header offset: 512 (aligned 512) [ 0.947926] UBI: data offset: 2048 [ 1.192002] UBI: attached mtd1 to ubi0 [ 1.195798] UBI: MTD device name: "ubi" [ 1.200614] UBI: MTD device size: 126 MiB [ 1.205618] UBI: number of good PEBs: 1012 [ 1.210354] UBI: number of bad PEBs: 2 [ 1.214838] UBI: max. allowed volumes: 128 [ 1.219487] UBI: wear-leveling threshold: 4096 [ 1.224228] UBI: number of internal volumes: 1 [ 1.228704] UBI: number of user volumes: 5 [ 1.233182] UBI: available PEBs: 688 [ 1.237833] UBI: total number of reserved PEBs: 324 [ 1.242747] UBI: number of PEBs reserved for bad PEB handling: 10 [ 1.248882] UBI: max/mean erase counter: 245/11 [ 1.253485] UBI: background thread "ubi_bgt0d" started, PID 280 [ 1.261961] mice: PS/2 mouse device common for all mice [ 1.267247] MXC keypad loaded [ 1.272208] input: mxckpd as /class/input/input0 [ 1.483649] MXC WatchDog Driver 2.0 [ 1.488612] MXC Watchdog # 0 Timer: initial timeout 60 sec [ 1.501490] input: front panel as /class/input/input1 [ 1.724861] input: msp430 as /class/input/input2 [ 1.843471] msp430 1-0010: rtc core: registered msp430 as rtc0 [ 1.851192] Requesting msp430 firmware msp430-0002.txt [ 1.857731] firmware: requesting msp430-0002.txt [ 1.866718] i.MX ADC at 0x50030000 irq 46 [ 1.872051] mxsdhci: MXC Secure Digital Host Controller Interface driver [ 1.879004] mxsdhci: MXC SDHCI Controller Driver. [ 1.920833] mmc0: SDHCI detect irq 0 irq 9 PIO [ 1.981316] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.092424] AIC3104 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=1 buf->addr=78001000 buf->area=c4860000 size=65536 [ 2.105171] DMA Sound Buffers Allocated:UseIram=1 buf->addr=83e10000 buf->area=fde97000 size=65536 [ 2.114193] asoc: aic3104-dai <-> imx-ssi-1 mapping ok [ 2.270970] ALSA device list: [ 2.273984] #0: baby (aic3104) [ 2.277236] oprofile: using timer interrupt. [ 2.292327] NET: Registered protocol family 2 [ 2.392334] mmc0: new SDIO card at address 0001 [ 2.641854] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 2.655199] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 2.663257] TCP bind hash table entries: 2048 (order: 3, 57344 bytes) [ 2.671405] TCP: Hash tables configured (established 2048 bind 2048) [ 2.677808] TCP reno registered [ 2.805983] TCP cubic registered [ 2.809281] NET: Registered protocol family 17 [ 2.825379] msp430 1-0010: setting system clock to 1970-01-01 00:00:05 UTC (5) [ 2.840407] VFS: Mounted root (cramfs filesystem) readonly. [ 2.846893] Freeing init memory: 120K [ 4.025049] UBIFS: recovery needed [ 4.064155] UBIFS: recovery completed [ 4.067892] UBIFS: mounted UBI device 0, volume 2, name "ubifs" [ 4.073875] UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) [ 4.081241] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) [ 4.088506] UBIFS: media format: w4/r0 (latest is w4/r0) [ 4.094380] UBIFS: default compressor: lzo [ 4.098513] UBIFS: reserved for root: 444870 bytes (434 KiB) Factory Reset [ 5.828857] msp430: flash erased [ 5.858098] UBIFS: un-mount UBI device 0, volume 2 [ 5.988741] UBIFS: default file-system created [ 6.035935] UBIFS: mounted UBI device 0, volume 2, name "ubifs" [ 6.041925] UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) [ 6.049282] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) [ 6.056553] UBIFS: media format: w4/r0 (latest is w4/r0) [ 6.062432] UBIFS: default compressor: lzo [ 6.066563] UBIFS: reserved for root: 444870 bytes (434 KiB) Filesystem overlay: unionfs mount: mounting /dev on /mnt/overlay/dev failed: Invalid argument init started: BusyBox v1.13.4 (2009-09-02 14:43:49 PDT) starting pid 373, tty '': '/etc/init.d/rcS' ls: /etc/dev.tar: No such file or directory Starting udev[ 14.790927] i2c-adapter i2c-1: ACK not received [ 14.795622] Couldn't read msp ID register, resetting mcu [ 16.391191] i2c-adapter i2c-1: ACK not received [ 16.395892] Couldn't read msp ID register, resetting mcu [ 17.920943] msp430: upgrade (-1 to 773) tar: removing leading '/' from member names Mounting RAM Disk Starting syslogd [ 30.022801] msp430: upgrade complete (773) First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd root: wlan: starting Setting eth1 macaddr: 00:04:20:26:01:80 Load Board Data from /lib/atheros/calData_ar6102_15dBm.bin Updating MAC address BMI Write Memory (address: 0x502400, filename: /lib/atheros/athwlan.bin) BMI Write Memory (address: 0x52d8bc, filename: /lib/atheros/data.patch.hw2_0.bin) BMI Write Memory (address: 0x500418, value: 0x52d8bc) BMI Bit-Wise (OR) modify Register (address: 0x500410, orig:0x0, new: 0x1, mask:0x1) BMI Done [ 33.901819] AR6000 Reg Code = 0x40000060 Selected interface 'eth1' root: wlan started Starting SqueezePlay Please press Enter to activate this console. Squeezeplay 7.4.0 r7453 [ 176.546242] channel hint set to 2412 [ 176.668162] AR6000 connected event on freq 2412 with bssid 00:0b:0e:b0:49:84 listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=66 assocRespLen =48 [ 176.683373] Network: Infrastructure [ 261.000437] eth1 (WE) : Wireless Event too big (33) [ 261.007595] AR6000 disconnected from 00:0b:0e:b0:49:84 AR6000 disconnected starting pid 985, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # # # # channel hint set to 2462 [ 324.719186] AR6000 disconnectedAR6000 connected event on freq 2462 with bssid 00:0b:0e:4d:84:44 listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=66 assocRespLen =48 [ 324.789913] Network: Infrastructure Thu Sep 10 11:26:40 Local time zone must be set--see zic manual page 2009 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # reboot The system is going down NOW! # Sending SIGTERM to all processes [ 354.888386] mxc_wdt: Unexpected close, not stopping! [ 354.908258] eth1 (WE) : Wireless Event too big (33) [ 354.915968] AR6000 disconnected from 00:0b:0e:4d:84:44 <3>i2c-adapter i2c-0: Data not transmitted [ 354.939064] i2c-adapter i2c-0: Data not transmitted [ 354.944199] i2c-adapter i2c-0: Data not transmitted [ 354.949206] i2c-adapter i2c-0: Data not transmitted Sending SIGKILL to all processes Requesting system reboot [ 359.032503] MXC Watchdog # 0 shutdown [ 359.036230] Restarting system. ++NAND: RCSR=54200902 Searching for BBT table in the flash ... . Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 639 is bad Block 709 is bad Total bad blocks: 2 .FEC PHY: RTL8201EL FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:26:01:80 No IP info for device! Unrecognized chip: 0xf8!!! hardware reset by WDOG Clock input is 24 MHz RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 13:29:54, Jun 30 2009 Platform: Logitech Baby (i.MX25 ) PASS 1.0 [x32 DDR] System type 2070 revision 2 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x03f00000, [0x00095250-0x03ef1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 635 ..........................................................................................................................................skipping bad block 705 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x002d4800 [ 0.000000] Linux version 2.6.26.8-rt16 (parabuild@compute-0-4.local) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT RT Mon Sep 7 07:12:09 PDT 2009 [ 0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 [ 0.000000] Machine: Logitech MX25 Baby Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttymxc1,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs [ 0.000000] Preemptible RCU implementation. [ 0.000000] MXC IRQ initialized [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] MXC GPT timer initialized, rate = 12000000 [ 0.000000] WARNING: Clock divider has been truncated, clock error 333 [ps] per 83 [ns] [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 64MB = 64MB total [ 0.000000] Memory: 61968KB available (2588K code, 248K data, 120K init) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] net_namespace: 276 bytes [ 0.000000] NET: Registered protocol family 16 [ 0.000000] AIPS1 VA base: 0xfc000000 [ 0.000000] CPU is i.MX0 Revision 0.2 [ 0.000000] Clock input source is 24000000 [ 0.000000] MXC GPIO hardware [ 0.000000] Using SDMA I.API [ 0.000000] MXC DMA API initialized [ 0.000000] epit_clk: 66500000 [ 0.000000] per_epit_clk: 66500000 [ 0.000000] ahb_clk: 133000000 [ 0.000000] cpu_clk: 399000000 [ 0.000000] mpll: 532000000 [ 0.000000] osc24m: 24000000 [ 0.000140] MXC EPIT timer initialized, rate = 16625000 4 [ 0.030062] MXC I2C driver [ 0.032666] MXC I2C driver [ 0.037035] ASoC version 0.20 [ 0.131349] NET: Registered protocol family 1 [ 0.134146] Bus freq driver module loaded [ 0.138437] krcupreemptd setsched 0 [ 0.138478] prio = 98 [ 0.141211] Registering unionfs 2.5.1 (for 2.6.26.8) [ 0.142094] msgmni has been set to 121 [ 0.142430] io scheduler noop registered [ 0.142474] io scheduler anticipatory registered [ 0.142505] io scheduler deadline registered [ 0.142717] io scheduler cfq registered (default) [ 0.147323] **** baby_lcd_spi_init [ 0.379258] Console: switching to colour frame buffer device 30x40 [ 0.385444] mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully. [ 0.390309] mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully. [ 0.393561] MXC Backlight Device mxc_lcdc_bl.0 Initialized. [ 0.469615] Serial: MXC Internal UART driver [ 0.470027] mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC [ 0.470138] console [ttymxc1] enabled [ 0.801020] brd: module loaded [ 0.824768] loop: module loaded [ 0.828007] FEC ENET Version 0.2 [ 0.833153] fec: PHY @ 0x1, ID 0x001cc815 -- RTL8201E [ 0.840194] eth0: ethernet 00:04:20:26:01:80 [ 0.846238] MXC MTD nand Driver 2.5 [ 0.851292] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 0.862062] Searching for RedBoot partition table in NAND 128MiB 3,3V 8-bit at offset 0x7f60000 [ 0.882033] No RedBoot partition table detected in NAND 128MiB 3,3V 8-bit [ 0.889128] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": [ 0.895397] 0x00000000-0x00080000 : "redboot" [ 0.904942] 0x00080000-0x07f40000 : "ubi" [ 0.916796] UBI: attaching mtd1 to ubi0 [ 0.920684] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.927175] UBI: logical eraseblock size: 129024 bytes [ 0.932618] UBI: smallest flash I/O unit: 2048 [ 0.937357] UBI: sub-page size: 512 [ 0.942016] UBI: VID header offset: 512 (aligned 512) [ 0.947889] UBI: data offset: 2048 [ 1.191574] UBI: attached mtd1 to ubi0 [ 1.195370] UBI: MTD device name: "ubi" [ 1.200187] UBI: MTD device size: 126 MiB [ 1.205190] UBI: number of good PEBs: 1012 [ 1.209928] UBI: number of bad PEBs: 2 [ 1.214410] UBI: max. allowed volumes: 128 [ 1.219059] UBI: wear-leveling threshold: 4096 [ 1.223800] UBI: number of internal volumes: 1 [ 1.228276] UBI: number of user volumes: 5 [ 1.232755] UBI: available PEBs: 688 [ 1.237407] UBI: total number of reserved PEBs: 324 [ 1.242323] UBI: number of PEBs reserved for bad PEB handling: 10 [ 1.248454] UBI: max/mean erase counter: 245/11 [ 1.253054] UBI: background thread "ubi_bgt0d" started, PID 280 [ 1.261539] mice: PS/2 mouse device common for all mice [ 1.266830] MXC keypad loaded [ 1.271725] input: mxckpd as /class/input/input0 [ 1.483671] MXC WatchDog Driver 2.0 [ 1.488617] MXC Watchdog # 0 Timer: initial timeout 60 sec [ 1.501483] input: front panel as /class/input/input1 [ 1.724857] input: msp430 as /class/input/input2 [ 1.843465] msp430 1-0010: rtc core: registered msp430 as rtc0 [ 1.851165] Requesting msp430 firmware msp430-0002.txt [ 1.857715] firmware: requesting msp430-0002.txt [ 1.866679] i.MX ADC at 0x50030000 irq 46 [ 1.872053] mxsdhci: MXC Secure Digital Host Controller Interface driver [ 1.879004] mxsdhci: MXC SDHCI Controller Driver. [ 1.920834] mmc0: SDHCI detect irq 0 irq 9 PIO [ 1.981310] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.092408] AIC3104 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=1 buf->addr=78001000 buf->area=c4860000 size=65536 [ 2.105137] DMA Sound Buffers Allocated:UseIram=1 buf->addr=83e20000 buf->area=fde97000 size=65536 [ 2.114161] asoc: aic3104-dai <-> imx-ssi-1 mapping ok [ 2.270976] ALSA device list: [ 2.273992] #0: baby (aic3104) [ 2.277245] oprofile: using timer interrupt. [ 2.292321] NET: Registered protocol family 2 [ 2.392605] mmc0: new SDIO card at address 0001 [ 2.641853] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 2.655209] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 2.663266] TCP bind hash table entries: 2048 (order: 3, 57344 bytes) [ 2.671414] TCP: Hash tables configured (established 2048 bind 2048) [ 2.677817] TCP reno registered [ 2.805961] TCP cubic registered [ 2.809258] NET: Registered protocol family 17 [ 2.825373] msp430 1-0010: setting system clock to 1970-01-01 00:00:05 UTC (5) [ 2.840390] VFS: Mounted root (cramfs filesystem) readonly. [ 2.846875] Freeing init memory: 120K [ 4.024511] UBIFS: recovery needed [ 4.057784] UBIFS: recovery completed [ 4.061523] UBIFS: mounted UBI device 0, volume 2, name "ubifs" [ 4.067495] UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) [ 4.074855] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) [ 4.082130] UBIFS: media format: w4/r0 (latest is w4/r0) [ 4.087999] UBIFS: default compressor: lzo [ 4.092140] UBIFS: reserved for root: 444870 bytes (434 KiB) Filesystem overlay: unionfs mount: mounting /dev on /mnt/overlay/dev failed: Invalid argument init started: BusyBox v1.13.4 (2009-09-02 14:43:49 PDT) starting pid 363, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd [ 14.299342] msp430: firmware ok (773) Starting lo Starting inetd root: wlan: starting Setting eth1 macaddr: 00:04:20:26:01:80 Load Board Data from /lib/atheros/calData_ar6102_15dBm.bin Updating MAC address BMI Write Memory (address: 0x502400, filename: /lib/atheros/athwlan.bin) BMI Write Memory (address: 0x52d8bc, filename: /lib/atheros/data.patch.hw2_0.bin) BMI Write Memory (address: 0x500418, value: 0x52d8bc) BMI Bit-Wise (OR) modify Register (address: 0x500410, orig:0x0, new: 0x1, mask:0x1) BMI Done [ 16.790187] AR6000 Reg Code = 0x40000060 Selected interface 'eth1' root: wlan started Starting SqueezePlay Please press Enter to activate this console. udhcpc (v1.13.4) started killall: zcip: no process killed Sending discover... Squeezeplay 7.4.0 r7453 Sending discover... [ 23.828774] channel hint set to 2412 [ 23.959453] AR6000 connected event on freq 2412 with bssid 00:0b:0e:b0:49:84 listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=66 assocRespLen =48 [ 23.974653] Network: Infrastructure Performing a DHCP renew Sending discover... Sending select for 172.19.120.239... Lease of 172.19.120.239 obtained, lease time 3600 killall: zcip: no process killed route: SIOCDELRT: No such process adding dns 172.19.113.11 adding dns 172.19.113.11 Thu Sep 10 11:27:50 Local time zone must be set--see zic manual page 2009 starting pid 747, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # #