starting pid 915, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # # # mxc_wdt: Unexpected close, not stopping! AIC3104 WRITE 43: 00000080 AIC3104 WRITE 44: 00000080 eth1 (WE) : Wireless Event too big (33) AR6000 disconnected from 00:1e:2a:72:41:17 ###### sound/soc/codecs/tlv320aic3104 .c:1194 aic3104_dapm_event AIC3104 WRITE 72: 00000004 AIC3104 WRITE 93: 00000008 AIC3104 WRITE 58: 00000004 AIC3104 WRITE 86: 00000008 AIC3104 WRITE 37: 00000080 AIC3104 WRITE 37: 00000000 ###### sound/soc/codecs/tlv320aic3104.c:1194 aic3104_dapm_event AIC3104 WRITE 3: 00000012 MXC Watchdog # 0 shutdown Restarting system. ++NAND: RCSR=54200902 Searching for BBT table in the flash ... . Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 237 is bad Block 238 is bad Block 376 is bad Block 971 is bad Total bad blocks: 4 .FEC PHY: RTL8201EL FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:26:00:b1 No IP info for device! Unrecognized chip: 0xf8!!! hardware reset by WDOG Clock input is 24 MHz RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 13:29:54, Jun 30 2009 Platform: Logitech Baby (i.MX25 ) PASS 1.0 [x32 DDR] System type 2070 revision 2 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x03f00000, [0x00095250-0x03ef1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 233 skipping bad block 234 ..................................................................................................................................................................................................................................................................................skipping bad block 372 ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 967 ............................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x00199800 Uncompressing Linux........................................................................................................ done, booting the kernel. Linux version 2.6.26.8-rt16 (parabuild@compute-0-0.local) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT RT Sat Jul 11 08:33:23 PDT 2009 CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 Machine: Logitech MX25 Baby Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttymxc1,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs Preemptible RCU implementation. MXC IRQ initialized PID hash table entries: 256 (order: 8, 1024 bytes) MXC GPT timer initialized, rate = 12000000 WARNING: Clock divider has been truncated, clock error 333 [ps] per 83 [ns] Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61564KB available (2960K code, 277K data, 128K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 276 bytes NET: Registered protocol family 16 AIPS1 VA base: 0xfc000000 CPU is i.MX0 Revision 0.2 Clock input source is 24000000 MXC GPIO hardware Using SDMA I.API MXC DMA API initialized MXC I2C driver MXC I2C driver ASoC version 0.20 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 3, 57344 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 Bus freq driver module loaded krcupreemptd setsched 0 prio = 98 Registering unionfs 2.5.1 (for 2.6.26.8) msgmni has been set to 120 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) MXC Backlight Device mxc_lcdc_bl.0 Initialized. Console: switching to colour frame buffer device 30x40 mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully. mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully. Serial: MXC Internal UART driver mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC console [ttymxc1] enabled brd: module loaded loop: module loaded FEC ENET Version 0.2 fec: PHY @ 0x1, ID 0x001cc815 -- RTL8201E eth0: ethernet 00:04:20:26:00:b1 MXC MTD nand Driver 2.5 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Searching for RedBoot partition table in NAND 128MiB 3,3V 8-bit at offset 0x7f60000 No RedBoot partition table detected in NAND 128MiB 3,3V 8-bit Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 712 UBI: total number of reserved PEBs: 298 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 175/9 UBI: background thread "ubi_bgt0d" started, PID 283 mice: PS/2 mouse device common for all mice MXC keypad loaded input: mxckpd as /class/input/input0 MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec input: Unspecified device as /class/input/input1 input: msp430 as /class/input/input2 Requesting msp430 firmware msp430-0002.txt firmware: requesting msp430-0002.txt i.MX ADC at 0x50030000 irq 46 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 9 PIO Advanced Linux Sound Architecture Driver Version 1.0.16. AIC3104 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=1 buf->addr=78001000 buf->area=c4860000 size=65536 DMA Sound Buffers Allocated:UseIram=1 buf->addr=83d80000 buf->area=fde97000 size=65536 asoc: aic3104-dai <-> imx-ssi-1 mapping ok AIC3104 WRITE 0: 00000000 AIC3104 WRITE 1: 00000080 AIC3104 WRITE 43: 00000080 AIC3104 WRITE 44: 00000080 AIC3104 WRITE 47: 00000080 AIC3104 WRITE 64: 00000080 AIC3104 WRITE 54: 00000080 AIC3104 WRITE 71: 00000080 AIC3104 WRITE 82: 00000080 AIC3104 WRITE 92: 00000080 AIC3104 WRITE 86: 00000008 AIC3104 WRITE 93: 00000008 AIC3104 WRITE 25: 00000080 AIC3104 WRITE 38: 00000020 AIC3104 WRITE 40: 00000080 AIC3104 WRITE 51: 0000000d AIC3104 WRITE 65: 00000009 AIC3104 WRITE 14: 00000080 AIC3104 WRITE 13: 00000080 AIC3104 WRITE 15: 00000028 AIC3104 WRITE 16: 00000028 AIC3104 WRITE 17: 000000ff AIC3104 WRITE 18: 000000ff AIC3104 WRITE 19: 00000004 AIC3104 WRITE 22: 00000004 ###### sound/soc/codecs/tlv320aic3104.c:1194 aic3104_dapm_event AIC3104 WRITE 65: 00000008 AIC3104 WRITE 51: 0000000c mmc0: new SDIO card at address 0001 ALSA device list: #0: baby (aic3104) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 128K