== factory reset FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:9e No IP info for device! hardware reset by POR Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Chip is working in consumer mode RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 16:05:43, Mar 2 2009 Platform: Logitech Fab4 (i.MX35 ) PASS2100 [x32 DDR] System type 1804 revision 5 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x07f00000, [0x00095790-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. == Executing boot script in 0.100 seconds - enter ^C to abort RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ..................................skipping bad block 17 ..............................................................................................................................................................................................................................................................................................................................................skipping bad block 185 ..skipping bad block 187 ..........................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 377 ........................skipping bad block 390 ....................................................................................................................................skipping bad block 457 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 886 ..............................skipping bad block 902 ..............................................................................................................................................................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001f8000 Uncompressing Linux.............................................................................................................................. done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Fri Apr 24 11:07:49 PDT 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttymxc0,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs factoryreset=true MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125840KB available (3620K code, 299K data, 148K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.5 Clock input source is 24000000 MXC GPIO hardware Reset status: Power On Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 fec: PHY @ 0x1, ID 0x00008201 -- RTL8210CP eth0: ethernet 00:04:20:22:00:9e Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1006 UBI: number of bad PEBs: 8 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 399 UBI: total number of reserved PEBs: 607 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 222/7 UBI: background thread "ubi_bgt0d" started, PID 314 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usb 1-1: new high speed USB device using fsl-ehci and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan - (without firmware) drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 1 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 2 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 4 port adapter usbcore: registered new interface driver keyspan drivers/usb/serial/keyspan.c: v1.1.5:Keyspan USB to Serial Converter Driver mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75: probe of 0-0048 failed with error -1 MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff204000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff214000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e30000 buf->area=ff224000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:58:11 UTC (14291) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 148K UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 19869696 bytes (19404 KiB, 18 MiB, 154 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 8 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 981976 bytes (958 KiB) Factory Reset UBIFS: un-mount UBI device 0, volume 2 UBIFS: default file-system created UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 19869696 bytes (19404 KiB, 18 MiB, 154 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 8 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 981976 bytes (958 KiB) Filesystem overlay: mini_fo mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage mount: mounting /dev on /mnt/overlay/dev failed: Invalid argument init started: BusyBox v1.13.3 (2009-04-24 11:10:58 PDT) starting pid 452, tty '': '/etc/init.d/rcS' ls: /etc/dev.tar: No such file or directory Starting udevFAB4 IR: fw checksum ok aa33 tar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan scsi 0:0:0:0: Direct-Access Memorex Mini TravelDrive 6.16 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] 1988607 512-byte hardware sectors (1018 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 1988607 512-byte hardware sectors (1018 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk scsi 0:0:0:1: CD-ROM Memorex Mini TravelDrive 6.16 PQ: 0 ANSI: 0 UBIFS error (pid 944): ubifs_get_sb: cannot open "/dev/sda", error -22 Setting wlan0 ethaddr: 00:04:20:22:00:9E Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Starting SqueezePlay Please press Enter to activate this console. eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. eth0 no wireless extensions. udhcpc (v1.13.3) started killall: zcip: no process killed Sending discover... Jive 7.4 r5472 Loading: jive.JiveMain src/ui/jive_framework.c:183 DEBUG 32 bits/pixel 4 bytes/pixel [R<<16 G<<8 B<<0] src/ui/jive_framework.c:184 DEBUG Hardware acceleration is available src/ui/jive_surface.c:47 DEBUG Using a hardware double buffer src/ui/jive_surface.c:50 DEBUG Video mode: 32 bits/pixel 4 bytes/pixel [R<<16 G<<8 B<<0] src/audio/decode/decode_alsa.c:749 DEBUG Playback device: default src/audio/decode/decode_alsa.c:426 DEBUG audio_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:765 DEBUG Effects device: plughw:2,0 src/audio/decode/decode_alsa.c:426 DEBUG audio_thread_execute src/audio/decode/decode.c:286 DEBUG decode_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Sending discover... src/rhapsody/rhapsody.c:877 DEBUG decode_rhapsody_init src/rhapsody/rhapsody.c:909 DEBUG decode_rhapsody_init ok Cannot find image applets/Fab4Skin/images/Touch_Tool_bar/tch_volumebar_fill.png Cannot find image applets/Fab4Skin/images/Touch_Tool_bar/tch_volumebar_whole.png Sending discover... killall: zcip: no process killed No lease, forking to background eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. starting pid 1014, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # # # # # # # # # # # # # # # ++Searching for BBT table in the flash ... . Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 21 is bad Block 189 is bad Block 191 is bad Block 381 is bad Block 394 is bad Block 461 is bad Block 890 is bad Block 906 is bad Total bad blocks: 8 .== enter ^C to abort == factory reset FEC: [ HALF_DUPLEX ] [ disconnected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:9e No IP info for device! hardware reset by POR Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Chip is working in consumer mode RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200904 - built 16:05:43, Mar 2 2009 Platform: Logitech Fab4 (i.MX35 ) PASS2100 [x32 DDR] System type 1804 revision 5 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited RAM: 0x00000000-0x07f00000, [0x00095790-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. == Executing boot script in 0.100 seconds - enter ^C to abort RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs ..................................skipping bad block 17 ..............................................................................................................................................................................................................................................................................................................................................skipping bad block 185 ..skipping bad block 187 ..........................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 377 ........................skipping bad block 390 ....................................................................................................................................skipping bad block 457 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................skipping bad block 886 ..............................skipping bad block 902 ..............................................................................................................................................................................................................................scanning is finished RedBoot> ubi load -b 0x100000 kernel%{os_backup} RedBoot> exec -c %{os_cmdline}entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001f8000 Uncompressing Linux.............................................................................................................................. done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Fri Apr 24 11:07:49 PDT 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttymxc0,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs factoryreset=true MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125840KB available (3620K code, 299K data, 148K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.5 Clock input source is 24000000 MXC GPIO hardware Reset status: Power On Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 fec: PHY @ 0x1, ID 0x00008201 -- RTL8210CP eth0: ethernet 00:04:20:22:00:9e Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1006 UBI: number of bad PEBs: 8 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 399 UBI: total number of reserved PEBs: 607 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 223/7 UBI: background thread "ubi_bgt0d" started, PID 314 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usb 1-1: new high speed USB device using fsl-ehci and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan - (without firmware) drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 1 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 2 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 4 port adapter usbcore: registered new interface driver keyspan drivers/usb/serial/keyspan.c: v1.1.5:Keyspan USB to Serial Converter Driver mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75: probe of 0-0048 failed with error -1 MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff204000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff214000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e30000 buf->area=ff224000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 04:00:09 UTC (14409) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 148K UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 19869696 bytes (19404 KiB, 18 MiB, 154 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 8 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 981976 bytes (958 KiB) Factory Reset UBIFS: un-mount UBI device 0, volume 2 UBIFS: default file-system created UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 19869696 bytes (19404 KiB, 18 MiB, 154 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 8 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 981976 bytes (958 KiB) Filesystem overlay: mini_fo mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage mount: mounting /dev on /mnt/overlay/dev failed: Invalid argument init started: BusyBox v1.13.3 (2009-04-24 11:10:58 PDT) starting pid 452, tty '': '/etc/init.d/rcS' ls: /etc/dev.tar: No such file or directory Starting udevFAB4 IR: fw checksum ok aa33 tar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan scsi 0:0:0:0: Direct-Access Memorex Mini TravelDrive 6.16 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] 1988607 512-byte hardware sectors (1018 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 1988607 512-byte hardware sectors (1018 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk scsi 0:0:0:1: CD-ROM Memorex Mini TravelDrive 6.16 PQ: 0 ANSI: 0 UBIFS error (pid 956): ubifs_get_sb: cannot open "/dev/sda", error -22 Setting wlan0 ethaddr: 00:04:20:22:00:9E Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Starting SqueezePlay Please press Enter to activate this console. eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. eth0 no wireless extensions. udhcpc (v1.13.3) started killall: zcip: no process killed Sending discover... Jive 7.4 r5472 Loading: jive.JiveMain src/ui/jive_framework.c:183 DEBUG 32 bits/pixel 4 bytes/pixel [R<<16 G<<8 B<<0] src/ui/jive_framework.c:184 DEBUG Hardware acceleration is available src/ui/jive_surface.c:47 DEBUG Using a hardware double buffer src/ui/jive_surface.c:50 DEBUG Video mode: 32 bits/pixel 4 bytes/pixel [R<<16 G<<8 B<<0] src/audio/decode/decode_alsa.c:749 DEBUG Playback device: default src/audio/decode/decode_alsa.c:426 DEBUG audio_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:765 DEBUG Effects device: plughw:2,0 src/audio/decode/decode_alsa.c:426 DEBUG audio_thread_execute src/audio/decode/decode.c:286 DEBUG decode_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Sending discover... src/rhapsody/rhapsody.c:877 DEBUG decode_rhapsody_init src/rhapsody/rhapsody.c:909 DEBUG decode_rhapsody_init ok Cannot find image applets/Fab4Skin/images/Touch_Tool_bar/tch_volumebar_fill.png Cannot find image applets/Fab4Skin/images/Touch_Tool_bar/tch_volumebar_whole.png Sending discover... killall: zcip: no process killed No lease, forking to background eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. NOHZ: local_softirq_pending 08 NOHZ: local_softirq_pending 08 NOHZ: local_softirq_pending 08 NOHZ: local_softirq_pending 08 NOHZ: local_softirq_pending 08