=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.01.15 12:36:53 =~=~=~=~=~=~=~=~=~=~=~= starting pid 833, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # # # pwd / # ls -la drwxr-xr-x 5 root root 352 Jan 1 1970 [1;34m.[0m drwxr-xr-x 5 root root 352 Jan 1 1970 [1;34m..[0m drwxr-xr-x 1 root root 1080 Jan 1 1970 [1;34mbin[0m drwxr-xr-x 12 root root 2820 Jan 1 1970 [1;34mdev[0m drwxr-xr-x 3 root root 672 Jan 1 1970 [1;34metc[0m drwxr-xr-x 1 root root 1092 Jan 1 1970 [1;34mlib[0m -rwxr-xr-x 1 root root 1677 Jan 1 1970 [1;32mlinuxrc[0m drwxr-xr-x 4 root root 304 Jan 1 1970 [1;34mmedia[0m drwxr-xr-x 1 root root 40 Jan 1 1970 [1;34mmnt[0m dr-xr-xr-x 49 root root 0 Jan 1 1970 [1;34mproc[0m drwxr-xr-x 1 root root 0 Jan 1 1970 [1;34mroot[0m drwxr-xr-x 1 root root 748 Jan 1 1970 [1;34msbin[0m drwxr-xr-x 12 root root 0 Jan 1 1970 [1;34msys[0m drwxr-xr-x 2 root root 0 Jan 1 1970 [1;34mtmp[0m drwxr-xr-x 1 root root 116 Jan 1 1970 [1;34musr[0m drwxr-xr-x 5 root root 0 Jan 1 1970 [1;34mvar[0m # reboot The system is going down NOW! # Sending SIGTERM to all processes Unhandled fault: external abort on linefetch (0x006) at 0x00000000 Internal error: : 6 [#1] PREEMPT Modules linked in: sd8686 CPU: 0 Not tainted (2.6.24-332-g5849bfa #1) PC is at rb_erase+0x190/0x350 LR is at 0xc7135d80 pc : [] lr : [] psr: a0000013 sp : c72bdf20 ip : c7135d80 fp : c72bdf3c r10: 40564000 r9 : c7135c14 r8 : 404a4000 r7 : 00000001 r6 : c710fb04 r5 : c7135f38 r4 : c686b228 r3 : c696e908 r2 : c686b330 r1 : c7135598 r0 : c686b438 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 00c5387f Table: 87228008 DAC: 00000015 Process jive (pid: 829, stack limit = 0xc72bc260) Stack: (0xc72bdf20 to 0xc72be000) df20: c7135f20 c710fb00 c7135f20 c7135c08 c72bdf84 c72bdf40 c0090128 c0169f54 df40: 0000000c 404a4000 c710fb00 c710fb04 404a4000 c7135c08 c72bdf74 c710fb00 df60: c710fb34 404a4000 000bf400 c0031028 c72bc000 00000000 c72bdfa4 c72bdf88 df80: c0090274 c0090028 00000038 0000000c 00777d10 0000005b 00000000 c72bdfa8 dfa0: c0030e80 c009023c 00000038 0000000c 404a4000 000bf400 00777f60 00000000 dfc0: 00000038 0000000c 00777d10 0000005b 008b75d0 bedd23ec 00000000 0000075c dfe0: 00000004 bedd2330 403051c0 4041e3ec 60000010 404a4000 01040000 00005cdc Backtrace: [] (rb_erase+0x0/0x350) from [] (do_munmap+0x10c/0x214) r7:c7135c08 r6:c7135f20 r5:c710fb00 r4:c7135f20 [] (do_munmap+0x0/0x214) from [] (sys_munmap+0x44/0x58) [] (sys_munmap+0x0/0x58) from [] (ret_fast_syscall+0x0/0x2c) r7:0000005b r6:00777d10 r5:0000000c r4:00000038 Code: e5913004 e3530000 0a000002 e5933000 (e3130001) ssi1_irq SISR 11a1 SIER 180100 fifo_errs=1 ---[ end trace c2352c1818899cfe ]--- Sending SIGKILL to all processes Requesting system reboot MXC Watchdog # 0 shutdown Restarting system. ++NAND: RCSR=a800908 Searching for BBT table in the flash ... Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 321 is bad Block 785 is bad Block 895 is bad Block 1003 is bad Total bad blocks: 4 Ethernet FEC MAC address: hardware reset by watchdog Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Ringo Chip is working in auto mode [Warning] FEC not connect right PHY: ID=800000 FEC: [ HALF_DUPLEX ] [ connected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:1f No IP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200824 - built 13:42:24, Dec 12 2008 Platform: Logitech Fab4 (i.MX35 ) PASS 1.0 [x32 DDR] Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x07f00000, [0x000256a0-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs skipping bad block 317 skipping bad block 781 skipping bad block 891 skipping bad block 999 scanning is finished RedBoot> ubi load -b 0x100000 kernel RedBoot> exec -c "noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc" entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001d8800 Uncompressing Linux............................................................................................................................ done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Tue Jan 13 10:56:48 PST 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125904KB available (3552K code, 291K data, 160K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.3 Clock input source is 24000000 MXC GPIO hardware Reset status: Watchdog timeout Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 FEC: No PHY device found. eth0: ethernet 00:04:20:22:00:1f Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 538 UBI: total number of reserved PEBs: 472 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 96/8 UBI: background thread "ubi_bgt0d" started, PID 311 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75 0-0048: hwmon0: sensor '' MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff185000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e10000 buf->area=ff195000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff1a5000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:07:36 UTC (11256) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 160K mmc1: new high speed SD card at address 8900 mmcblk0: mmc1:8900 SD02G 2011136KiB mmcblk0: p1 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 465482 bytes (454 KiB) mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2009-01-13 11:24:53 PST) starting pid 422, tty '': '/etc/init.d/rcS' Starting udev FAB4 IR: fw checksum ok 90eb UBIFS error (pid 633): ubifs_get_sb: cannot open "/dev/mmcblk0", error -22 Mounting RAM Disk Starting syslogd (to /media/mmcblk0p1/log) Enabling core files (to /media/mmcblk0p1/log) Starting lo Starting inetd Starting wlan Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument eth0 no wireless extensions. udhcpc (v1.7.0) started Sending discover... Sending select for 192.168.1.6... Lease of 192.168.1.6 obtained, lease time 86400 route: SIOCDELRT: No such process adding dns 192.168.1.1 Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3811 Loading: jive.JiveMain Not using a hardware surface Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:656 DEBUG Playback device: default src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:672 DEBUG Effects device: plughw:2,0 src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute src/audio/decode/decode.c:280 DEBUG decode_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Cannot find image applets/Fab4Skin/images/Icons/selection_wait.png src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop Thu Jan 15 11:37:02 UTC 2009 starting pid 832, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # pwd / # ls -la drwxr-xr-x 5 root root 352 Jan 1 1970 [1;34m.[0m drwxr-xr-x 5 root root 352 Jan 1 1970 [1;34m..[0m drwxr-xr-x 1 root root 1080 Jan 1 1970 [1;34mbin[0m drwxr-xr-x 12 root root 2820 Jan 1 1970 [1;34mdev[0m drwxr-xr-x 3 root root 672 Jan 1 1970 [1;34metc[0m drwxr-xr-x 1 root root 1092 Jan 1 1970 [1;34mlib[0m -rwxr-xr-x 1 root root 1677 Jan 1 1970 [1;32mlinuxrc[0m drwxr-xr-x 4 root root 304 Jan 1 1970 [1;34mmedia[0m drwxr-xr-x 1 root root 40 Jan 1 1970 [1;34mmnt[0m dr-xr-xr-x 49 root root 0 Jan 1 1970 [1;34mproc[0m drwxr-xr-x 1 root root 0 Jan 1 1970 [1;34mroot[0m drwxr-xr-x 1 root root 748 Jan 1 1970 [1;34msbin[0m drwxr-xr-x 12 root root 0 Jan 1 1970 [1;34msys[0m drwxr-xr-x 2 root root 0 Jan 1 1970 [1;34mtmp[0m drwxr-xr-x 1 root root 116 Jan 1 1970 [1;34musr[0m drwxr-xr-x 5 root root 0 Jan 1 1970 [1;34mvar[0m # cd etc # l s-la /bin/sh: l: not found # ls -la drwxr-xr-x 3 root root 672 Jan 1 1970 [1;34m.[0m drwxr-xr-x 5 root root 352 Jan 1 1970 [1;34m..[0m -rw-r--r-- 1 root root 1125 Jan 1 1970 [0;0masound.conf[0m -rw-r--r-- 1 root root 2075 Jan 1 1970 [0;0mbusybox.links[0m drwxr-xr-x 1 root root 0 Jan 1 1970 [1;34mdefault[0m -rw-r--r-- 1 root root 362496 Jan 1 1970 [0;0mdev.tar[0m drwxr-xr-x 1 root root 72 Jan 1 1970 [1;34mdropbear[0m -rw-r--r-- 1 root root 0 Jan 1 1970 [0;0mfirstboot[0m -rw-r--r-- 1 root root 62 Jan 1 1970 [0;0mfstab[0m -rw-r--r-- 1 root root 160 Jan 1 1970 [0;0mgroup[0m -rw-r--r-- 1 root root 20 Jan 1 1970 [0;0mhostname[0m -rw-r--r-- 1 root root 21 Jan 1 1970 [0;0mhosts[0m -rw-r--r-- 1 root root 3057 Jan 1 1970 [0;0minetd.conf[0m drwxr-xr-x 1 root root 112 Jan 1 1970 [1;34minit.d[0m -rw-r--r-- 1 root root 90 Jan 1 1970 [0;0minittab[0m -rw-r--r-- 1 root root 23 Jan 1 1970 [0;0missue[0m -rw-r--r-- 1 root root 107 Jan 1 1970 [0;0mkeep-after-upgrade[0m -rw-r--r-- 1 root root 15 Jan 1 1970 [0;0mld.so.conf[0m -rw-r--r-- 1 root root 580 Jan 1 1970 [0;0mmdev.conf[0m -rw-r--r-- 1 root root 488 Jan 1 1970 [0;0mmotd[0m lrwxrwxrwx 1 root root 12 Jan 1 1970 [1;36mmtab[0m -> [0;0m/proc/mounts[0m drwxr-xr-x 1 root root 216 Jan 1 1970 [1;34mnetwork[0m -rw-r--r-- 1 root root 363 Jan 1 1970 [0;0mnsswitch.conf[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mopkg[0m -rw-r--r-- 1 root root 30 Jan 1 1970 [0;0mpasswd[0m -rw-r--r-- 1 root root 2478 Jan 1 1970 [0;0mprotocols[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc0.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc1.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc2.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc3.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc4.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc5.d[0m drwxr-xr-x 1 root root 24 Jan 1 1970 [1;34mrc6.d[0m drwxr-xr-x 1 root root 20 Jan 1 1970 [1;34mrcS.d[0m -rw-r--r-- 1 root root 23 Jan 1 1970 [0;0mresolv.conf[0m -rw-r--r-- 1 root root 666 Jan 1 1970 [0;0mscsi_id.config[0m -rw-r--r-- 1 root root 410 Jan 1 1970 [0;0mservices[0m -rw-r--r-- 1 root root 59 Jan 1 1970 [0;0mshadow[0m drwxr-xr-x 1 root root 0 Jan 1 1970 [1;34mskel[0m -rw-r--r-- 1 root root 61 Jan 1 1970 [0;0msqueezeos.version[0m drwxrwxr-x 3 root root 232 Jan 1 1970 [1;34msqueezeplay[0m drwxr-xr-x 1 root root 116 Jan 1 1970 [1;34mudev[0m -rw-r--r-- 1 root root 13 Jan 1 1970 [0;0mversion[0m -rw-r--r-- 1 root root 55 Jan 1 1970 [0;0mwpa_supplicant.conf[0m # less sq # less squeeze[Jos[9D # less squeezeos.version [J 7.4 r3811 root@x86-ubuntu-build Wed Jan 14 01:26:57 PST 2009 # less version 200901140053 # # # # find * | grep mtd udev/rules.d/85-mtd.rules # src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop src/audio/decode/decode.c:496 DEBUG decode_start src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:226 DEBUG decode_start_handler decoder=66 num_params=4 src/audio/decode/decode_flac.c:201 DEBUG decode_flac_start() src/audio/streambuf.c:397 DEBUG streambuf connect 192.168.1.7:10275 src/audio/decode/decode_output.c:565 DEBUG Track gain 65536 src/audio/decode/decode_output.c:569 DEBUG Track clip range 7fffffff 80000000 src/audio/decode/decode_output.c:574 DEBUG Polarity inversion 0 src/audio/decode/decode_alsa.c:570 DEBUG decode_alsa_start src/audio/decode/decode.c:375 DEBUG decode_resume_decoder src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:83 DEBUG resume_decoder decode state: 1 audio state 0 src/audio/decode/decode.c:396 DEBUG decode_resume_audio start_jiffies=0 src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:97 DEBUG decode_resume_audio_handler start_interval=0 src/audio/decode/decode_alsa.c:581 DEBUG decode_alsa_resume src/audio/decode/decode.c:114 DEBUG resume_audio decode state: 1 audio state 1 src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_flac.c:237 DEBUG decode_flac_stop() src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop ++NAND: RCSR=a800908 Searching for BBT table in the flash ... Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 321 is bad Block 785 is bad Block 895 is bad Block 1003 is bad Total bad blocks: 4 Ethernet FEC MAC address: hardware reset by watchdog Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Ringo Chip is working in auto mode [Warning] FEC not connect right PHY: ID=800000 FEC: [ HALF_DUPLEX ] [ connected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:1f No IP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200824 - built 13:42:24, Dec 12 2008 Platform: Logitech Fab4 (i.MX35 ) PASS 1.0 [x32 DDR] Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x07f00000, [0x000256a0-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs skipping bad block 317 skipping bad block 781 skipping bad block 891 skipping bad block 999 scanning is finished RedBoot> ubi load -b 0x100000 kernel RedBoot> exec -c "noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc" entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001d8800 Uncompressing Linux............................................................................................................................ done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Tue Jan 13 10:56:48 PST 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125904KB available (3552K code, 291K data, 160K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.3 Clock input source is 24000000 MXC GPIO hardware Reset status: Watchdog timeout Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 FEC: No PHY device found. eth0: ethernet 00:04:20:22:00:1f Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 538 UBI: total number of reserved PEBs: 472 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 96/8 UBI: background thread "ubi_bgt0d" started, PID 311 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75 0-0048: hwmon0: sensor '' MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff185000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e10000 buf->area=ff195000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff1a5000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:14:19 UTC (11659) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 160K mmc1: new high speed SD card at address 8900 mmcblk0: mmc1:8900 SD02G 2011136KiB mmcblk0: p1 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 465482 bytes (454 KiB) mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2009-01-13 11:24:53 PST) starting pid 422, tty '': '/etc/init.d/rcS' Starting udev FAB4 IR: fw checksum ok 90eb UBIFS error (pid 623): ubifs_get_sb: cannot open "/dev/mmcblk0", error -22 Mounting RAM Disk Starting syslogd (to /media/mmcblk0p1/log) Enabling core files (to /media/mmcblk0p1/log) Starting lo Starting inetd Starting wlan Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument eth0 no wireless extensions. udhcpc (v1.7.0) started Sending discover... Sending select for 192.168.1.6... Lease of 192.168.1.6 obtained, lease time 86400 route: SIOCDELRT: No such process adding dns 192.168.1.1 Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3811 Loading: jive.JiveMain Not using a hardware surface Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:656 DEBUG Playback device: default src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:672 DEBUG Effects device: plughw:2,0 src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute src/audio/decode/decode.c:280 DEBUG decode_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Cannot find image applets/Fab4Skin/images/Icons/selection_wait.png Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c72d0000 [00000000] *pgd=86827031, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT Modules linked in: sd8686 CPU: 0 Not tainted (2.6.24-332-g5849bfa #1) PC is at unlock_kernel+0x28/0x60 LR is at do_fcntl+0x270/0x320 pc : [] lr : [] psr: a0000013 sp : c73aff48 ip : c73aff60 fp : c73aff5c r10: 00000000 r9 : c73ae000 r8 : 00000024 r7 : 00000802 r6 : 00000004 r5 : 00000000 r4 : c73ae000 r3 : 00000000 r2 : 00000802 r1 : 00000002 r0 : 00000024 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 00c5387f Table: 872d0008 DAC: 00000015 Process jive (pid: 840, stack limit = 0xc73ae260) Stack: (0xc73aff48 to 0xc73b0000) ff40: c6824280 c6824280 c73aff84 c73aff60 c00af4d4 c02dc500 ff60: c73aff84 00000004 00000802 c6824280 00000024 c0031028 c73affa4 c73aff88 ff80: c00af5fc c00af270 00000004 00000024 405c3730 000000dd 00000000 c73affa8 ffa0: c0030e80 c00af590 00000004 00000024 00000024 00000004 00000802 000021d0 ffc0: 00000004 00000024 405c3730 000000dd 405c3724 405c19fb 405c3724 405c1b9c ffe0: 00000001 405c1708 406884fc 403464d0 80000010 00000024 72680078 656d6974 Backtrace: [] (unlock_kernel+0x0/0x60) from [] (do_fcntl+0x270/0x320) r4:c6824280 [] (do_fcntl+0x0/0x320) from [] (sys_fcntl64+0x78/0x8c) r8:c0031028 r7:00000024 r6:c6824280 r5:00000802 r4:00000004 [] (sys_fcntl64+0x0/0x8c) from [] (ret_fast_syscall+0x0/0x2c) r7:000000dd r6:405c3730 r5:00000024 r4:00000004 Code: e594300c e5933014 e3530000 b3a03000 (b5833000) ssi1_irq SISR 11a1 SIER 180100 fifo_errs=1 ---[ end trace da0c533e80ab9e39 ]--- src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop Thu Jan 15 11:43:45 UTC 2009 mxc_wdt: Unexpected close, not stopping! ++NAND: RCSR=a800908 Searching for BBT table in the flash ... Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 321 is bad Block 785 is bad Block 895 is bad Block 1003 is bad Total bad blocks: 4 Ethernet FEC MAC address: hardware reset by watchdog Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Ringo Chip is working in auto mode [Warning] FEC not connect right PHY: ID=800000 FEC: [ HALF_DUPLEX ] [ connected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:1f No IP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200824 - built 13:42:24, Dec 12 2008 Platform: Logitech Fab4 (i.MX35 ) PASS 1.0 [x32 DDR] Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x07f00000, [0x000256a0-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs skipping bad block 317 skipping bad block 781 skipping bad block 891 skipping bad block 999 scanning is finished RedBoot> ubi load -b 0x100000 kernel RedBoot> exec -c "noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc" entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001d8800 Uncompressing Linux............................................................................................................................ done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Tue Jan 13 10:56:48 PST 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125904KB available (3552K code, 291K data, 160K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.3 Clock input source is 24000000 MXC GPIO hardware Reset status: Watchdog timeout Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 FEC: No PHY device found. eth0: ethernet 00:04:20:22:00:1f Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 538 UBI: total number of reserved PEBs: 472 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 96/8 UBI: background thread "ubi_bgt0d" started, PID 311 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75 0-0048: hwmon0: sensor '' MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff185000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e10000 buf->area=ff195000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff1a5000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:20:00 UTC (12000) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 160K mmc1: new high speed SD card at address 8900 mmcblk0: mmc1:8900 SD02G 2011136KiB mmcblk0: p1 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 465482 bytes (454 KiB) mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2009-01-13 11:24:53 PST) starting pid 422, tty '': '/etc/init.d/rcS' Starting udev FAB4 IR: fw checksum ok 90eb UBIFS error (pid 646): ubifs_get_sb: cannot open "/dev/mmcblk0", error -22 Mounting RAM Disk Starting syslogd (to /media/mmcblk0p1/log) Enabling core files (to /media/mmcblk0p1/log) Starting lo Starting inetd Starting wlan Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument eth0 no wireless extensions. udhcpc (v1.7.0) started Sending discover... Sending select for 192.168.1.6... Lease of 192.168.1.6 obtained, lease time 86400 route: SIOCDELRT: No such process adding dns 192.168.1.1 Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3811 Loading: jive.JiveMain Not using a hardware surface ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card src/audio/decode/decode_alsa.c:237 ERROR Playback open error: No such device ++NAND: RCSR=a800908 Searching for BBT table in the flash ... Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 321 is bad Block 785 is bad Block 895 is bad Block 1003 is bad Total bad blocks: 4 Ethernet FEC MAC address: hardware reset by watchdog Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Ringo Chip is working in auto mode [Warning] FEC not connect right PHY: ID=800000 FEC: [ HALF_DUPLEX ] [ connected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:1f No IP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200824 - built 13:42:24, Dec 12 2008 Platform: Logitech Fab4 (i.MX35 ) PASS 1.0 [x32 DDR] Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x07f00000, [0x000256a0-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs skipping bad block 317 skipping bad block 781 skipping bad block 891 skipping bad block 999 scanning is finished RedBoot> ubi load -b 0x100000 kernel RedBoot> exec -c "noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc" entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001d8800 Uncompressing Linux............................................................................................................................ done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Tue Jan 13 10:56:48 PST 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125904KB available (3552K code, 291K data, 160K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.3 Clock input source is 24000000 MXC GPIO hardware Reset status: Watchdog timeout Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 FEC: No PHY device found. eth0: ethernet 00:04:20:22:00:1f Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 538 UBI: total number of reserved PEBs: 472 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 96/8 UBI: background thread "ubi_bgt0d" started, PID 311 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75 0-0048: hwmon0: sensor '' MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff185000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e10000 buf->area=ff195000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff1a5000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:20:50 UTC (12050) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 160K mmc1: new high speed SD card at address 8900 mmcblk0: mmc1:8900 SD02G 2011136KiB mmcblk0: p1 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 465482 bytes (454 KiB) mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2009-01-13 11:24:53 PST) starting pid 422, tty '': '/etc/init.d/rcS' Starting udev FAB4 IR: fw checksum ok 90eb UBIFS error (pid 653): ubifs_get_sb: cannot open "/dev/mmcblk0", error -22 Mounting RAM Disk Starting syslogd (to /media/mmcblk0p1/log) Enabling core files (to /media/mmcblk0p1/log) Starting lo Starting inetd Starting wlan Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument eth0 no wireless extensions. udhcpc (v1.7.0) started Sending discover... Sending select for 192.168.1.6... Lease of 192.168.1.6 obtained, lease time 86400 route: SIOCDELRT: No such process adding dns 192.168.1.1 Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3811 Loading: jive.JiveMain Not using a hardware surface Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:656 DEBUG Playback device: default src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 0 3 <- 1 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Multi PCM Channel bindings: 0: slave 0, channel 0 1: slave 0, channel 1 2: slave 1, channel 0 3: slave 1, channel 1 Its setup is: stream : PLAYBACK access : MMAP_COMPLEX format : S24_LE subformat : STD channels : 4 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #0: Hardware PCM card 0 'MXC SPDIF TX/RX' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave #1: Hardware PCM card 1 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 src/audio/decode/decode_alsa.c:672 DEBUG Effects device: plughw:2,0 src/audio/decode/decode_alsa.c:378 DEBUG audio_thread_execute src/audio/decode/decode.c:280 DEBUG decode_thread_execute Plug PCM: Route conversion PCM (sformat=S24_LE) Transformation table: 0 <- 0*0.5 + 1*0.5 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Slave: Hardware PCM card 2 'fab4' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 32 buffer_size : 1323 period_size : 441 period_time : 10000 tstamp_mode : NONE period_step : 1 avail_min : 441 period_event : 0 start_threshold : 1 stop_threshold : 1323 silence_threshold: 0 silence_size : 0 boundary : 1387266048 Cannot find image applets/Fab4Skin/images/Icons/selection_wait.png libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_file_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. libpng error: incorrect data check Error in jive_surface_load_image: Error reading the PNG file. src/audio/decode/decode.c:462 DEBUG decode_stop src/audio/decode/decode.c:290 DEBUG handling message src/audio/decode/decode.c:158 DEBUG decode_stop_handler src/audio/decode/decode_alsa.c:605 DEBUG decode_alsa_stop ++NAND: RCSR=a800908 Searching for BBT table in the flash ... Found version 1 Bbt0 at block 1023 (0x7fe0000) Block 321 is bad Block 785 is bad Block 895 is bad Block 1003 is bad Total bad blocks: 4 Ethernet FEC MAC address: hardware reset by watchdog Clock input is 24 MHz Booting from [NAND flash] [0x08000000 bytes]: 1024 blocks of 64 pages of 2048 bytes each. Ringo Chip is working in auto mode [Warning] FEC not connect right PHY: ID=800000 FEC: [ HALF_DUPLEX ] [ connected ] [ 10M bps ]: Ethernet mxc_fec: MAC address 00:04:20:22:00:1f No IP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version FSL 200824 - built 13:42:24, Dec 12 2008 Platform: Logitech Fab4 (i.MX35 ) PASS 1.0 [x32 DDR] Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x07f00000, [0x000256a0-0x07ed1000] available FLASH: 0x00000000 - 0x8000000, 1024 blocks of 0x00020000 bytes each. RedBoot> ubi attach -f 0x80000 -l 0x07EC0000 -w 0x800 -e 0x20000 -s 0x200 scanning 1014 PEBs skipping bad block 317 skipping bad block 781 skipping bad block 891 skipping bad block 999 scanning is finished RedBoot> ubi load -b 0x100000 kernel RedBoot> exec -c "noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc" entry=0x80008000, target=0x80008000 Using base address 0x00100000 and length 0x001d8800 Uncompressing Linux............................................................................................................................ done, booting the kernel. Linux version 2.6.24-332-g5849bfa (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 PREEMPT Tue Jan 13 10:56:48 PST 2009 CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f Machine: Logitech Fab4 Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: noinitrd console=ttymxc0,115200 ubi.mtd=1 root=/dev/mtdblock:cramfs init=/linuxrc MXC IRQ initialized PID hash table entries: 512 (order: 9, 2048 bytes) MXC GPT timer initialized, rate = 16625000 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 125904KB available (3552K code, 291K data, 160K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 L2X0 cache controller enabled CPU is i.MX0 Revision 0.3 Clock input source is 24000000 MXC GPIO hardware Reset status: Watchdog timeout Using SDMA I.API MXC DMA API initialized SCSI subsystem initialized CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver clk: Unable to get requested clock: dfm_clk ASoC version 0.20 NET: Registered protocol family 2 Time: mxc_gpt clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered usb: DR host (utmi) registered Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already uninitialized 14 Console: switching to colour frame buffer device 60x34 mxc_ipu mxc_ipu: Channel already uninitialized 15 mxcfb: fb registered, using mode Wintek-480x272 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC loop: module loaded FEC ENET Version 0.2 FEC: No PHY device found. eth0: ethernet 00:04:20:22:00:1f Driver 'sd' needs updating - please use bus_type methods MXC MTD nand Driver 2.4 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) RedBoot partition parsing not available cmdlinepart partition parsing not available Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00080000 : "redboot" 0x00080000-0x07f40000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 126 MiB UBI: number of good PEBs: 1010 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 5 UBI: available PEBs: 538 UBI: total number of reserved PEBs: 472 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 96/8 UBI: background thread "ubi_bgt0d" started, PID 311 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Clearpad: TM1199Logitech (7552,4248) input: Synaptics ClearPad as /class/input/input0 tsl2569 0-0039: support ver. 1.0 enabled lm75 0-0048: hwmon0: sensor '' MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec IPU Post-filter loading mxc_asrc registered input: FAB4 IR as /class/input/input1 mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). MXC spdif support initialized usbcore: registered new interface driver snd-usb-audio AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e00000 buf->area=ff185000 size=65536 asoc: ak4420-dai <-> imx-ssi-1 mapping ok imx_ssi_probe: failure requesting irq ssi1 imx-ssi: probe of imx-ssi-3 failed with error -16 WM8974 Audio Codec 0.1 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e10000 buf->area=ff195000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=87e20000 buf->area=ff1a5000 size=65536 asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok fab4 WM8974 Audio Driver mmc0: new SDIO card at address 0001 ALSA device list: #0: MXC Freescale with SPDIF #1: fab4 (ak4420) #2: fab4 (wm8974) oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 03:21:58 UTC (12118) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 160K mmc1: new high speed SD card at address 8900 mmcblk0: mmc1:8900 SD02G 2011136KiB mmcblk0: p1 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 9418752 bytes (9198 KiB, 8 MiB, 73 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs) UBIFS: media format: 4 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 465482 bytes (454 KiB) mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2009-01-13 11:24:53 PST) starting pid 422, tty '': '/etc/init.d/rcS' Starting udev Unable to handle kernel paging request at virtual address 47e96780 pgd = c0004000 [47e96780] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (2.6.24-332-g5849bfa #1) PC is at __rcu_process_callbacks+0x1a8/0x270 LR is at __slab_free+0x98/0x330 pc : [] lr : [] psr: 20000113 sp : c71a1d68 ip : c71a1d00 fp : c71a1d84 r10: 00000000 r9 : c03d6e40 r8 : 00000001 r7 : c03d5b40 r6 : 00000008 r5 : c03d6e04 r4 : 47e96780 r3 : 0000000a r2 : 47e96780 r1 : c7220380 r0 : 00000001 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 00c5387f Table: 871a8008 DAC: 00000015 Process mount.sh (pid: 496, stack limit = 0xc71a0260) Stack: (0xc71a1d68 to 0xc71a2000) 1d60: c005b2a4 00000000 c03d5b64 c03d5b40 c71a1d94 c71a1d88 1d80: c0064ca0 c0064a24 c71a1db4 c71a1d98 c00570a8 c0064c94 c03d5b40 c03d5ba4 1da0: 00000001 00000007 c71a1de4 c71a1db8 c0056f7c c0057044 0000001d 0000001d 1dc0: c03b5604 00000000 00000003 00000002 c71a0000 401e8000 c71a1dfc c71a1de8 1de0: c00573b0 c0056f28 c03b5604 0000001d c71a1e1c c71a1e00 c003004c c0057370 1e00: c0082990 ffffffff f8900000 001d0000 c71a1e74 c71a1e20 c0030aa4 c003000c 1e20: c7170898 40195000 874b605f ffffffd7 c04db600 c7197e54 40195000 c7170898 1e40: 401e8000 00000000 401e8000 c71a1e74 08000075 c71a1e68 000874b6 c008ad04 1e60: 40000013 ffffffff c71a1eec c71a1e78 c008c288 c008acf8 401e7fff 401e7fff 1e80: ffffffff 00000000 c71a1efc 00000001 00000000 c03cef5c c71a9000 c71a9000 1ea0: c71a0000 c713dc60 874b005f fffffff9 00000000 ffffffd7 401e8000 00000000 1ec0: c713dc94 c71a1efc c713dc94 c71709f8 00000000 c713dc60 c71a0000 00000001 1ee0: c71a1f24 c71a1ef0 c008f504 c008c0a0 c71a1ef8 00000000 00000056 c03cef5c 1f00: c713dc60 c713dc94 c7d258c0 000000f8 c0031028 00000000 c71a1f3c c71a1f28 1f20: c004f3dc c008f4a8 c713dc60 c713dc94 c71a1f5c c71a1f40 c00537e0 c004f3ac 1f40: 000000f8 00000001 c7d258c0 00000000 c71a1f74 c71a1f60 c0055018 c00536e4 1f60: 00000000 00000001 c71a1f94 c71a1f78 c0055614 c0054e2c c00376a0 0008ba2c 1f80: 0008ba08 0009fc1c c71a1fa4 c71a1f98 c005562c c005557c 00000000 c71a1fa8 1fa0: c0030e80 c0055620 0008ba2c 0008ba08 00000000 00000000 00000001 00000000 1fc0: 0008ba2c 0008ba08 0009fc1c 000000f8 bee7ce74 00000000 0009ff24 00000000 1fe0: 40165730 bee7c8d0 00066458 40165760 60000010 00000000 c4ad4544 80af5ab9 Backtrace: [] (__rcu_process_callbacks+0x0/0x270) from [] (rcu_process_callbacks+0x18/0x38) r6:c03d5b40 r5:c03d5b64 r4:00000000 [] (rcu_process_callbacks+0x0/0x38) from [] (tasklet_action+0x70/0xb0) [] (tasklet_action+0x0/0xb0) from [] (__do_softirq+0x60/0xc4) r6:00000007 r5:00000001 r4:c03d5ba4 [] (__do_softirq+0x0/0xc4) from [] (irq_exit+0x4c/0x9c) [] (irq_exit+0x0/0x9c) from [] (__exception_text_start+0x4c/0x64) r4:0000001d [] (__exception_text_start+0x0/0x64) from [] (__irq_svc+0x44/0x6c) Exception stack(0xc71a1e20 to 0xc71a1e68) 1e20: c7170898 40195000 874b605f ffffffd7 c04db600 c7197e54 40195000 c7170898 1e40: 401e8000 00000000 401e8000 c71a1e74 08000075 c71a1e68 000874b6 c008ad04 1e60: 40000013 ffffffff r6:001d0000 r5:f8900000 r4:ffffffff [] (vm_normal_page+0x0/0x60) from [] (unmap_vmas+0x1f4/0x5cc) [] (unmap_vmas+0x0/0x5cc) from [] (exit_mmap+0x68/0x138) [] (exit_mmap+0x0/0x138) from [] (mmput+0x3c/0xe4) [] (mmput+0x0/0xe4) from [] (exit_mm+0x108/0x10c) r5:c713dc94 r4:c713dc60 [] (exit_mm+0x0/0x10c) from [] (do_exit+0x1f8/0x750) r6:00000000 r5:c7d258c0 r4:00000001 [] (do_exit+0x0/0x750) from [] (sys_exit_group+0x0/0x1c) [] (do_group_exit+0x0/0xa4) from [] (sys_exit_group+0x18/0x1c) r6:0009fc1c r5:0008ba08 r4:0008ba2c [] (sys_exit_group+0x0/0x1c) from [] (ret_fast_syscall+0x0/0x2c) Code: 11a02000 13a06000 099da870 ea000009 (e5924000) Kernel panic - not syncing: Fatal exception in interrupt