=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.01.05 10:06:50 =~=~=~=~=~=~=~=~=~=~=~= err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 Mon Jan 5 09:53:19 UTC 2009 err=-32 err=-32 err=-32 err=-32 err=-32 err=-32 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 err=-32 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:1041 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 10:00:20 (1231149620) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 10:00:56 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:384e SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 10:18:46 (1231150726) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument starting pid 593, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:176a SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 10:27:45 (1231151265) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 10:28:21 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Mon Jan 5 10:29:01 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 0e:b4:d4:4e:61:1e usb0: HOST MAC 5a:7b:92:1b:34:f3 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:3f64 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 10:46:00 (1231152360) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 10:46:34 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Mon Jan 5 10:47:14 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 0e:b4:d4:4e:61:1e usb0: HOST MAC 5a:7b:92:1b:34:f3 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:ac0a SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 11:02:12 (1231153332) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 11:02:46 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:90a3 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 11:08:49 (1231153729) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 11:09:25 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Mon Jan 5 11:10:04 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:3094 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 11:27:04 (1231154824) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 11:27:38 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Mon Jan 5 11:28:18 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:12d3 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-05 11:48:25 (1231156105) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Mon Jan 5 11:48:59 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Mon Jan 5 11:49:39 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Mon Jan 5 15:05:57 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c3494000 r6:c3d283a0 r5:c3490000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 NETDEV WATCHDOG: eth0: transmit timed out Mon Jan 5 18:19:15 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c3494000 r6:c3d283a0 r5:c3490000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 Mon Jan 5 19:19:15 UTC 2009 Mon Jan 5 20:19:15 UTC 2009 Mon Jan 5 21:19:15 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Mon Jan 5 22:19:15 UTC 2009 Mon Jan 5 23:19:15 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out Tue Jan 6 00:19:15 UTC 2009 Tue Jan 6 01:19:15 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:65bf SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 01:34:01 (1231205641) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 01:34:35 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Tue Jan 6 01:35:14 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:61db SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 01:50:15 (1231206615) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 jffs2_scan_inode_node(): CRC failed on node at 0x00e7e1f0: Read 0xffffffff, calculated 0x12a8645c mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 01:50:49 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:480b SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 01:52:47 (1231206767) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 jffs2_scan_inode_node(): CRC failed on node at 0x00e7e1f0: Read 0xffffffff, calculated 0x12a8645c Empty flash at 0x00e7e31c ends at 0x00e7e400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 01:53:23 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Tue Jan 6 01:54:02 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:f1b8 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 02:15:01 (1231208101) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 jffs2_scan_inode_node(): CRC failed on node at 0x00e7e1f0: Read 0xffffffff, calculated 0x12a8645c Empty flash at 0x00e7e31c ends at 0x00e7e400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 02:15:36 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Tue Jan 6 02:16:15 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:9b15 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 02:30:58 (1231209058) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x00e7c1dc: Read 0xffffffff, calculated 0xcd509a7e Empty flash at 0x00e7c23c ends at 0x00e7c400 jffs2_scan_inode_node(): CRC failed on node at 0x00e7e1f0: Read 0xffffffff, calculated 0x12a8645c Empty flash at 0x00e7e31c ends at 0x00e7e400 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 02:31:32 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:1aac SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 02:33:30 (1231209210) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 02:34:06 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Tue Jan 6 02:34:46 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:c1fa SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 02:49:47 (1231210187) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x0048c800: read 0xd76057b1, calculated 0x159e2e91. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 02:50:21 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:960e SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 02:55:24 (1231210524) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 02:56:03 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Tue Jan 6 02:56:39 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:52f6 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 03:11:40 (1231211500) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x0048d600: read 0x4a289b93, calculated 0x377648f8. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 03:12:14 UTC 2009 Tue Jan 6 04:12:14 UTC 2009 Tue Jan 6 05:12:14 UTC 2009 Tue Jan 6 06:12:14 UTC 2009 Tue Jan 6 07:12:14 UTC 2009 Tue Jan 6 08:12:14 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Tue Jan 6 08:48:05 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c3a9c000 r6:c3d283a0 r5:c3b74000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:d620 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:11:27 (1231240287) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 Empty flash at 0x0048d6e8 ends at 0x0048d800 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:12:03 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:ad1f SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:16:01 (1231240561) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 Empty flash at 0x0048d6e8 ends at 0x0048d800 SqueezeOS Upgraded JFFS2 notice: (246) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:16:37 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:4638 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:29:42 (1231241382) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 Empty flash at 0x0048d6e8 ends at 0x0048d800 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:30:20 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:b967 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:34:13 (1231241653) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Empty flash at 0x0048c8f0 ends at 0x0048ca00 Empty flash at 0x0048d6e8 ends at 0x0048d800 SqueezeOS Upgraded JFFS2 notice: (246) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:34:49 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:3236 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:51:58 (1231242718) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:52:37 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:b7d0 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 11:56:30 (1231242990) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Jive 7.4 r3665 Please press Enter to activate this console. Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 11:57:07 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:e364 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 12:10:13 (1231243813) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 12:10:51 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:2df3 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 12:14:45 (1231244085) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded JFFS2 notice: (246) check_node_data: wrong data CRC in data node at 0x00e7f400: read 0x7f3b5fb5, calculated 0xa5b3b21b. mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 12:15:21 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:3728 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 12:31:35 (1231245095) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 12:32:11 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:9e25 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-06 12:36:09 (1231245369) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Tue Jan 6 12:36:47 UTC 2009 Tue Jan 6 13:37:20 UTC 2009 Tue Jan 6 14:37:20 UTC 2009 Tue Jan 6 15:37:20 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Tue Jan 6 16:37:20 UTC 2009 Tue Jan 6 18:49:40 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c354c000 r6:c3d283a0 r5:c3548000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out Tue Jan 6 19:52:39 UTC 2009 Tue Jan 6 20:52:39 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c354c000 r6:c3d283a0 r5:c3548000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 Tue Jan 6 22:13:50 UTC 2009 Tue Jan 6 23:13:50 UTC 2009 Wed Jan 7 00:13:50 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Wed Jan 7 01:13:50 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:19ed SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 01:26:55 (1231291615) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 01:27:29 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:75dc SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 01:31:24 (1231291884) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 01:32:01 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:bcdd SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 01:45:08 (1231292708) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 01:45:46 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:55cd SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 01:49:40 (1231292980) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 01:50:16 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:fa8a SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:07:21 (1231294041) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:08:01 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:e527 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:11:54 (1231294314) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:12:29 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:48fc SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:25:35 (1231295135) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:26:15 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:007b SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:30:07 (1231295407) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:30:42 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:623b SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:46:56 (1231296416) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:47:32 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:76c3 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 02:51:21 (1231296681) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 02:51:57 UTC 2009 Wed Jan 7 05:49:08 UTC 2009 Wed Jan 7 06:49:08 UTC 2009 Wed Jan 7 07:49:08 UTC 2009 Wed Jan 7 08:49:08 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Wed Jan 7 09:49:08 UTC 2009 Wed Jan 7 10:39:46 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c35d2000 r6:c3d283a0 r5:c3ab4000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:61:7a:87:95:b9 usb0: HOST MAC e6:5a:a5:de:67:40 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:de26 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 12:57:15 (1231333035) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 12:57:50 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 12:58:30 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:d5d6 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 14:02:19 (1231336939) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 14:02:54 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 14:03:34 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:0b1e SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 14:18:32 (1231337912) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 14:19:07 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 0e:b4:d4:4e:61:1e usb0: HOST MAC 5a:7b:92:1b:34:f3 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:e35d SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 14:21:07 (1231338067) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 14:21:43 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 14:22:22 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:2853 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 14:43:21 (1231339401) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 14:43:55 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 14:44:35 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:b148 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 14:59:17 (1231340357) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x0122de00: read 0x712193d5, calculated 0x4849195b. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 14:59:52 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:c6b0 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 15:01:50 (1231340510) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 Empty flash at 0x0122de10 ends at 0x0122e000 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 15:02:26 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 15:03:06 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=913 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:f2d4 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 15:23:11 (1231341791) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 Empty flash at 0x0122de10 ends at 0x0122e000 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 15:23:45 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Wed Jan 7 15:24:24 UTC 2009 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 36:4e:b8:3b:33:34 usb0: HOST MAC 82:43:1b:e9:21:f7 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:b345 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-07 15:39:25 (1231342765) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K jffs2_scan_inode_node(): CRC failed on node at 0x0122cbc4: Read 0xffffffff, calculated 0x94f65bf6 Empty flash at 0x0122cd60 ends at 0x0122ce00 Empty flash at 0x0122de10 ends at 0x0122e000 mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' JFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x0122f200: read 0x5035d400, calculated 0x990a5ecb. Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Wed Jan 7 15:40:00 UTC 2009 Wed Jan 7 17:55:04 UTC 2009 Wed Jan 7 18:55:04 UTC 2009 Wed Jan 7 19:55:04 UTC 2009 Wed Jan 7 20:55:04 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Wed Jan 7 21:55:04 UTC 2009 Wed Jan 7 22:55:04 UTC 2009 Wed Jan 7 23:55:04 UTC 2009 Thu Jan 8 00:55:04 UTC 2009 Thu Jan 8 02:30:33 UTC 2009 Thu Jan 8 03:30:33 UTC 2009 Thu Jan 8 04:30:33 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out Thu Jan 8 05:30:33 UTC 2009 NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c348c000 r6:c3d283a0 r5:c3b90000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 NETDEV WATCHDOG: eth0: transmit timed out Unbalanced enable for IRQ 52 WARNING: at kernel/irq/manage.c:158 enable_irq() [] (dump_stack+0x0/0x14) from [] (enable_irq+0x68/0xb0) [] (enable_irq+0x0/0xb0) from [] (sbi_get_int_status+0x4c/0x258 [gspi8xxx]) r5:c3d283a0 r4:00000005 [] (sbi_get_int_status+0x0/0x258 [gspi8xxx]) from [] (wlan_service_main_thread+0x1b4/0x518 [gspi8xxx]) r8:00001394 r7:c348c000 r6:c3d283a0 r5:c3b90000 r4:00000000 [] (wlan_service_main_thread+0x0/0x518 [gspi8xxx]) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 Thu Jan 8 06:30:33 UTC 2009 Thu Jan 8 07:30:33 UTC 2009 Thu Jan 8 09:24:32 UTC 2009 Thu Jan 8 10:24:32 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:1b24 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 11:14:15 (1231413255) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 11:14:48 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Thu Jan 8 11:15:27 UTC 2009 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 82:45:02:f8:79:09 usb0: HOST MAC d2:22:c8:b1:80:d6 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:c073 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 11:20:57 (1231413657) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Factory Reset mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 254, tty '': '/etc/init.d/rcS' Starting udevtar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:020a SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 11:30:11 (1231414211) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Factory Reset mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 254, tty '': '/etc/init.d/rcS' Starting udevtar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 11:32:58 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:b95d SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 11:53:34 (1231415614) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=1 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=912 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x01600000-0x017d0000 : "kernel (ro)" 0x017d0000-0x02bd0000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x00030000-0x00200000 : "zimage" 0x00200000-0x01600000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 9e:9c:89:75:65:bf usb0: HOST MAC fa:0f:98:a1:92:4b usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:d014 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 11:54:58 (1231415698) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Factory Reset mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 254, tty '': '/etc/init.d/rcS' Starting udevtar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Thu Jan 8 12:57:35 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Thu Jan 8 13:01:15 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x001291a0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0074e000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=926 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC f6:c6:a5:7c:f8:3a usb0: HOST MAC 6a:32:60:d6:64:65 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:80e0 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 13:13:34 (1231420414) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 255, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 13:14:19 UTC 2009 starting pid 599, tty '': '/bin/sh' /bin/sh: can't access tty; job control turned off # cd /root # ls -la drwxr-xr-x 3 root root 0 Jan 8 12:48 . drwxr-xr-x 7 root root 0 Jan 1 1970 .. drwxr-xr-x 2 root root 0 Jan 8 12:48 .ssh # The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=927 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:e180 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 13:22:11 (1231420931) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 13:22:47 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=927 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 7e:d8:81:72:39:71 usb0: HOST MAC ce:33:d8:46:af:50 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:d125 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 13:38:33 (1231421913) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 13:39:09 UTC 2009 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Thu Jan 8 13:39:49 UTC 2009 The system is going down NOW! Sending SIGTERM to all processes Sending SIGKILL to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=928 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 2e:6d:33:6d:b8:c6 usb0: HOST MAC d6:27:24:b0:26:7e usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:1283 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 14:23:38 (1231424618) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udev Mounting RAM Disk Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Copy the authorized keys Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 14:24:13 UTC 2009 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=928 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 2e:6d:33:6d:b8:c6 usb0: HOST MAC d6:27:24:b0:26:7e usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:fe3d SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 14:49:59 (1231426199) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Factory Reset mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 254, tty '': '/etc/init.d/rcS' Starting udevtar: removing leading '/' from member names Mounting RAM Disk Starting syslogd First boot Applying patch: /media/*/squeezeos.patch /usr/bin/patch: **** Can't open patch file '/media/*/squeezeos.patch' : No such file or directory Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 14:54:25 UTC 2009 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] Modules linked in: gspi8xxx(P) gspi(P) CPU: 0 Tainted: P (2.6.22-P7 #1) PC is at jffs2_sum_write_sumnode+0x238/0x40c LR is at jffs2_sum_write_sumnode+0x258/0x40c pc : [] lr : [] psr: 80000013 sp : c0377cb8 ip : 0000004f fp : c0377d34 r10: c38c2b44 r9 : 000000e2 r8 : 00000016 r7 : c002bc00 r6 : c4862926 r5 : c21de900 r4 : c4862906 r3 : 00000000 r2 : 00000000 r1 : 0000e002 r0 : c3c3ea40 Flags: Nzcv IRQs on FIQs on Mode SVC_32 Segment kernel Control: 0005317f Table: 338b0000 DAC: 00000017 Process pdflush (pid: 54, stack limit = 0xc0376260) Stack: (0xc0377cb8 to 0xc0378000) 7ca0: c0377cf4 00000000 7cc0: 0000002c c002bc00 00000bf4 00000bd4 0035722c 20061985 00000bf4 fb54f0ab 7ce0: 00000076 00000000 00000000 00000000 00000000 c005e120 c004c9e4 00370678 7d00: 00000000 c38c2b44 c3b03874 000000c4 c38c2b44 00000ca0 c002bc00 0000018c 7d20: c002bcc8 000000c4 c0377d74 c0377d38 c00d8030 c00e48fc 00000000 c0377dbc 7d40: 000000c4 c0377db8 c002bc00 000000c4 c002bc00 0000018c c0377db8 c3816778 7d60: c3841560 c389fc64 c0377d94 c0377d78 c00d833c c00d7fb4 0000018c c38106f8 7d80: c389fc64 c002bc00 c0377dec c0377d98 c00dd610 c00d8318 00000001 00000000 7da0: c0377dec c0377db0 00000001 c009b074 c3c2da00 00000000 000000c4 c0377dc8 7dc0: c00995f0 c38893e0 c38106f8 c389fc64 c002bc00 c3816778 c3816778 00000001 7de0: c0377edc c0377df0 c00de50c c00dd5c4 00374000 00000000 c0377e2c c0377e08 7e00: c013de54 c013d428 c3816778 00000000 c38c2cb0 00000000 c381678c 0000b000 7e20: c38106f8 c0377e30 c01389e4 0000a000 c0377e60 c013d428 00378000 c38c2ce4 7e40: c002bc00 c38c2ce4 c002bc2c 60000013 c218a2b8 00000003 c0377e7c c0377e68 7e60: c005b290 c005b240 00000001 c002b600 c0377e8c c0377e80 c0099560 c005b27c 7e80: c0377edc c0377e90 c00a2eb0 c0099558 c00e002c c0060694 ffffffff ffffffff 7ea0: c0377ef4 c0377eb0 00000000 c002bcf4 c0377f4c c002bc00 c002bc2c 00357400 7ec0: c0377f38 c026e918 00000001 00000000 c0377efc c0377ee0 c00e3790 c00ddb5c 7ee0: c002bc00 00000000 c0270aec c0377f38 c0377f14 c0377f00 c00e04d4 c00e36dc 7f00: c002be00 c002be40 c0377f34 c0377f18 c0088a78 c00e04a0 c00540d0 c0377f38 7f20: c0270838 c0377f9c c0377f8c c0377f38 c0070a44 c0088a10 00000000 00000000 7f40: c0377f6c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7f60: 00000025 00000000 c0270838 c0377f9c c0376000 c0270838 c0377f9c c02957f0 7f80: c0377fd4 c0377f90 c007108c c00709fc c0372d60 c00709ec 00000000 c0377f9c 7fa0: c0377f9c ffffe555 c0377fd4 c0376000 00000000 c0070f5c 00000000 00000000 7fc0: 00000000 00000000 c0377ff4 c0377fd8 c005af68 c0070f6c 00000000 00000000 7fe0: 00000000 00000000 00000000 c0377ff8 c004a750 c005af1c 69de69bb 7610f57a Backtrace: [] (jffs2_sum_write_sumnode+0x0/0x40c) from [] (jffs2_do_reserve_space+0x8c/0x364) [] (jffs2_do_reserve_space+0x0/0x364) from [] (jffs2_reserve_space_gc+0x34/0x58) [] (jffs2_reserve_space_gc+0x0/0x58) from [] (jffs2_garbage_collect_pristine+0x5c/0x428) r7:c002bc00 r6:c389fc64 r5:c38106f8 r4:0000018c [] (jffs2_garbage_collect_pristine+0x0/0x428) from [] (jffs2_garbage_collect_pass+0x9c0/0x16a4) [] (jffs2_garbage_collect_pass+0x0/0x16a4) from [] (jffs2_flush_wbuf_gc+0xc4/0x198) [] (jffs2_flush_wbuf_gc+0x0/0x198) from [] (jffs2_write_super+0x44/0x48) r7:c0377f38 r6:c0270aec r5:00000000 r4:c002bc00 [] (jffs2_write_super+0x0/0x48) from [] (sync_supers+0x78/0xb4) r5:c002be40 r4:c002be00 [] (sync_supers+0x0/0xb4) from [] (wb_kupdate+0x58/0x14c) r6:c0377f9c r5:c0270838 r4:c0377f38 [] (wb_kupdate+0x0/0x14c) from [] (pdflush+0x130/0x1e8) r7:c02957f0 r6:c0377f9c r5:c0270838 r4:c0376000 [] (pdflush+0x0/0x1e8) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 Code: e0846003 ea000004 e3520901 13a02000 (15822000) WARNING: at kernel/exit.c:869 do_exit() [] (dump_stack+0x0/0x14) from [] (do_exit+0x54/0x7b8) [] (do_exit+0x0/0x7b8) from [] (die+0x1ac/0x1f8) [] (die+0x0/0x1f8) from [] (__do_kernel_fault+0x6c/0x7c) [] (__do_kernel_fault+0x0/0x7c) from [] (do_page_fault+0x208/0x220) r7:c0377c70 r6:c0372d60 r5:c0269fc8 r4:ffffffff [] (do_page_fault+0x0/0x220) from [] (do_DataAbort+0x3c/0xa0) [] (do_DataAbort+0x0/0xa0) from [] (__dabt_svc+0x4c/0x60) Exception stack(0xc0377c70 to 0xc0377cb8) 7c60: c3c3ea40 0000e002 00000000 00000000 7c80: c4862906 c21de900 c4862926 c002bc00 00000016 000000e2 c38c2b44 c0377d34 7ca0: 0000004f c0377cb8 c00e4b44 c00e4b24 80000013 ffffffff r8:00000016 r7:c002bc00 r6:c4862926 r5:c0377ca4 r4:ffffffff [] (jffs2_sum_write_sumnode+0x0/0x40c) from [] (jffs2_do_reserve_space+0x8c/0x364) [] (jffs2_do_reserve_space+0x0/0x364) from [] (jffs2_reserve_space_gc+0x34/0x58) [] (jffs2_reserve_space_gc+0x0/0x58) from [] (jffs2_garbage_collect_pristine+0x5c/0x428) r7:c002bc00 r6:c389fc64 r5:c38106f8 r4:0000018c [] (jffs2_garbage_collect_pristine+0x0/0x428) from [] (jffs2_garbage_collect_pass+0x9c0/0x16a4) [] (jffs2_garbage_collect_pass+0x0/0x16a4) from [] (jffs2_flush_wbuf_gc+0xc4/0x198) [] (jffs2_flush_wbuf_gc+0x0/0x198) from [] (jffs2_write_super+0x44/0x48) r7:c0377f38 r6:c0270aec r5:00000000 r4:c002bc00 [] (jffs2_write_super+0x0/0x48) from [] (sync_supers+0x78/0xb4) r5:c002be40 r4:c002be00 [] (sync_supers+0x0/0xb4) from [] (wb_kupdate+0x58/0x14c) r6:c0377f9c r5:c0270838 r4:c0377f38 [] (wb_kupdate+0x0/0x14c) from [] (pdflush+0x130/0x1e8) r7:c02957f0 r6:c0377f9c r5:c0270838 r4:c0376000 [] (pdflush+0x0/0x1e8) from [] (kthread+0x5c/0x94) [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x7b8) r6:00000000 r5:00000000 r4:00000000 U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial sw2 ## Error: "sw2" not defined Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (parabuild@x86-ubuntu-build) (gcc version 4.2.3) #1 Sat Jan 3 01:36:10 PST 2009 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2272K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026abb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=928 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "jffs2" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026adf0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026b564: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC 4e:e6:15:86:46:e3 usb0: HOST MAC aa:5d:f3:69:ea:c4 usb0: RNDIS ready S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:a561 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: setting the system clock to 2009-01-08 14:54:54 (1231426494) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.0 (2008-12-21 13:25:38 PST) starting pid 248, tty '': '/etc/init.d/rcS' Starting udevJFFS2 notice: (242) check_node_data: wrong data CRC in data node at 0x00357400: read 0xd395b4fc, calculated 0xa229ca34. Mounting RAM Disk Starting syslogd Starting lo Starting inetd JFFS2 warning: (478) jffs2_sum_write_sumnode: Not enough space for summary, padsize = -274 Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:66:AC Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting SqueezePlay Please press Enter to activate this console. Jive 7.4 r3665 Loading: jive.JiveMain src/audio/decode/decode_alsa.c:292 ERROR Unable to get period size: Invalid argument Thu Jan 8 14:55:29 UTC 2009