=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.08.10 11:26:48 =~=~=~=~=~=~=~=~=~=~=~= src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 starting pid 289, tty '/dev/tts/0': '/bin/sh' # # src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 src/audio/decode/decode_portaudio.c:46 DEBUG pa status 4 Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0012b0b0... ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 16384, page size 512, OOB size 16 Dumping data starting at 0x00000000 and ending at 0x0098b000... Erasing old environment /dev/mtd/3:4000 Writing environment to /dev/mtd/3:4000 Erasing old environment /dev/mtd/3:0 Writing environment to /dev/mtd/3:0 Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (root@padbuild) (gcc version 4.2.2) #72 Tue May 13 01:57:06 PDT 2008 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2280K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026cbb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=915 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "yaffs" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026d4c0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026d4ec: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk usb0: MAC be:ee:7c:52:8a:28 usb0: HOST MAC 7a:12:5a:69:f2:56 usb0: RNDIS ready mice: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver s3c2410-i2c s3c2410-i2c: slave address 0x00 s3c2410-i2c s3c2410-i2c: bus frequency set to 48 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter lis302dl 0-001c: LIS302DL, IRQ 58 input: lis302dl as /class/input/input3 s3c2412-sdi s3c2412-sdi: host detect has no irq available mapped channel 0 to 0 s3c2412-sdi s3c2412-sdi: powered down. s3c2412-sdi s3c2412-sdi: initialisation done. s3c2412-sdi s3c2412-sdi: running at 0kHz (requested: 0kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ASoC version 0.13.1 s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). JIVE WM8750 Audio support DMA: OUT=55000010, IN=55000014 GPECON=aaaaaaaa soc-audio soc-audio: RXEN: Invalid MODE in IISMOD WM8750: WM8750 Audio Codec 0.12 WM8750 spi2.0: probing device asoc: WM8750 <-> s3c2412-i2s mapping ok s3c2412-sdi s3c2412-sdi: running at 196kHz (requested: 195kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). s3c2412-sdi s3c2412-sdi: running at 25000kHz (requested: 25000kHz). mmcblk0: mmc0:d825 SD01G 3970048KiB mmcblk0: p1 mapping Headphone Jack => LOUT1 mapping Headphone Jack => ROUT1 mapping Internal Speaker => LOUT2 mapping Internal Speaker => ROUT2 mapping LINPUT1 => Line Input mapping RINPUT1 => Line Input WM8750 spi2.0: CODEC initialised driver_bound: device spi2.0 already bound ALSA device list: #0: Jive (WM8750) oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 s3c24xx_cpufreq_init: initialising s3c24xx_cpufreq_init: clocks f=200000,h=100000,p=50000,a=200000 s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K Creating /dev jffs2_scan_dirent_node(): Node CRC failed on node at 0x00780de8: Read 0xffffffff, calculated 0x43d0c296 Empty flash at 0x00780e14 ends at 0x00781000 SqueezeOS Upgraded mini_fo: using base directory: / mini_fo: using storage directory: /mnt/storage init started: BusyBox v1.7.1.svn (2008-05-13 01:42:10 PDT) starting pid 255, tty '': '/etc/init.d/rcS' Mounting RAM Disk Mounting MMC/SD card (partition 1) Starting syslogd Starting lo Starting inetd Starting wlan gspi: module license 'Proprietary' taints kernel. mapped channel 3 to 1 DMA TX on 1, RX on 1 Data transfer modes: RX=DMA, TX=DMA FIQ: setting TX/RX mode Setting ethaddr: 00:04:20:1A:4B:2D Setting region: 16 ioctl[SIOCSIWPMKSA]: Invalid argument Selected interface 'eth0' Starting jive applications Please press Enter to activate this console. Jive 7.1 r2447 Loading: jive.JiveMain mapped channel 10 to 2 The system is going down NOW! Sending SIGTERM to all processes s3c2410-wdt: Unexpected close, not stopping watchdog! Sending SIGKILL to all processes Requesting system reboot Restarting system. U-Boot 1.0.0 (Dec 18 2007 - 08:34:08) U-Boot code: 33E00000 -> 33E1D3E0 BSS: -> 33E2101C IRQ Stack: 33e42018 FIQ Stack: 33e43018 DRAM Configuration: Bank #0: 30000000 64 MB NAND:Nand Flash Probe... Nand Flash Configuration: Page Size :512 Bytes Oob Size :16 Bytes Block Size :16 KB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1  0 zImage magic = 0x016f2818 NOW, Booting Linux...... Uncompressing Linux................................................................................... done, booting the kernel. Linux version 2.6.22-P7 (root@padbuild) (gcc version 4.2.2) #72 Tue May 13 01:57:06 PDT 2008 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: JIVE Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412003) S3C2412: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics usysclk: parent urefclk i2sclk: parent erefclk camif-upll: parent usysclk msysclk: parent mpll uartclk: parent erefclk usbsrc: parent usysclk S3C2412: DVS is off Warning: USB bus clock not at 48MHz S3C2412: upll on, 96.000 MHz, usb-bus 48.000 MHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock1 console=ttySAC0,115200 mem=64M init=/linuxrc mtdset=0 irq: clearing pending ext status 00080300 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000012 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=0050d000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62208KB available (2280K code, 260K data, 152K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 S3C24XX CPU Frequency driver: registering c026cbb8 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) battery flat? no (level=916 nacpr=0) Console: switching to colour frame buffer device 30x40 fb0: s3c2410fb frame buffer device S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics jive_mgmt_init input: Switch as /class/input/input0 wake enabled for irq 55 input: Wheel as /class/input/input1 wake enabled for irq 56 wake enabled for irq 57 wake enabled for irq 51 input: Matrix as /class/input/input2 wake enabled for irq 19 wake enabled for irq 48 wake enabled for irq 49 wake enabled for irq 50 matrix_init: GPFCON=0000aa95 s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize CPUFreq test machine is not smdk2412 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2412-nand s3c2412-nand: Tacls=4, 40ns Twrph0=6 60ns, Twrph1=5 50ns s3c2412-nand s3c2412-nand: System booted from NAND NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00030000-0x00200000 : "kernel (ro)" 0x00200000-0x01600000 : "root (ro)" 0x02c00000-0x04000000 : "yaffs" 0x00028000-0x00030000 : "env" 0x01600000-0x017d0000 : "zimage" 0x017d0000-0x02bd0000 : "cramfs" s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c026d4c0: VGG2432A4 VGG2432A4 spi0.0: initialising VGG2432A4 s3c24xx-spi-gpio s3c24xx-spi-gpio.2: registering c026d4ec: WM8750 s3c2410_udc: debugfs dir creation failed -19 ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 u