SqueezeNetwork - Player Settings

Bedroom Settings | Disconnect Bedroom from SqueezeNetwork

Player Name:
Player Type:	Squeezebox 2/3
Player MAC Address:	00:04:20:06:11:34
Player IP Address:	64.81.55.190
Player Firmware Version:	86
Language:
Timezone:

When you select a single song and press PLAY on the remote, while browsing albums or folders, you can choose to play just that song or all the songs in that album or directory, starting with that song. This setting applies to MP3tunes and Rhapsody content only.
Play Other Songs In Album:

If your network requires the use of an HTTP proxy server, enter it here and all audio connections made by your player will use the proxy server. Use the format xx.xx.xx.xx:yyyy where xx.xx.xx.xx is the IP address of the proxy, and yyyy is the port number. Leave this field blank of you don't need to use a proxy.
HTTP Proxy (xx.xx.xx.xx:yyyy):
When playing an Internet stream, the player buffers a small amount of data before beginning playback. Specify the amount of audio data to buffer, in seconds from 3 to 30. The default value is 3 seconds. If you experience stuttering audio, increasing this value may help.
Radio Station Buffer Seconds:
Some WMA streams have multiple bitrates available for streaming. By default, SqueezeCenter will select the highest bitrate stream available, but if you have a slower Internet connection, you may set a lower value here to limit the maximum rate that can be chosen from these multiple rate streams.
Maximum WMA Stream Bitrate:
Apply these settings to all players:

Time Format:
Long Date Format:
Now Playing Information:
Screensaver when playing:
Screensaver when stopped:
Screensaver when off:
Brightness when on:
Brightness when off:
Brightness when idle:
Automatic Display Brightness:
Font:
Standby Font:
Scroll Mode:

You can choose to have the digital audio output on your player be fixed at maximum level or be controlled by the volume buttons. With either setting, the analog output levels are adjusted by the volume buttons.
Digital Volume Control:
This is a secondary volume control which applies only to the analog outputs on Squeezebox. Enter the amount of attenuation in decibels. Range is 0.0 to 63.0 in 0.5 db steps. The default is 0 (for full volume). WARNING: if your amplifier is powerful enough to blow your speakers, a receiver, preamp, or line attenuator should still be used as a safety measure!
Preamp Volume Control:
The player can gradually transition between songs, either by crossfading between them, or by fading songs in or out. Choose the type of crossfade you would like.
Crossfade:
Enter the amount of time to take to crossfade between songs, in seconds. The maximum is 10 seconds.
Crossfade duration:

Here you may customize the appearance of the SqueezeNetwork menu that appears on your players.

Apply these settings to all players:

You can choose to have this player respond to or ignore certain infrared remote signals. To enable a remote control code set, put a check next to the name below. To disable a remote control code set, clear the check mark.

Transporter Front Panel
Slim Devices Remote
JVC DVD Remote

This player can have up to 8 alarms: one alarm that goes off every day and individual alarms for each day of the week. You may also choose to have the alarm fade in over 20 seconds.

Fade Alarms In:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

Set Alarm Time:	:
Alarm Playlist:
Alarm Volume:
Alarm Status:

To enable Audioscrobbler for this player, select an account to use.